Using a multi-frequency acoustic backscatter system as an in situ high concentration dispersion monitor

Hunter, Timothy N., Darlison, Lucy, Peakall, Jeff and Biggs, Simon (2012) Using a multi-frequency acoustic backscatter system as an in situ high concentration dispersion monitor. Chemical Engineering Science, 80 409-418. doi:10.1016/j.ces.2012.06.038


Author Hunter, Timothy N.
Darlison, Lucy
Peakall, Jeff
Biggs, Simon
Title Using a multi-frequency acoustic backscatter system as an in situ high concentration dispersion monitor
Journal name Chemical Engineering Science   Check publisher's open access policy
ISSN 0009-2509
1873-4405
Publication date 2012-10-01
Sub-type Article (original research)
DOI 10.1016/j.ces.2012.06.038
Open Access Status
Volume 80
Start page 409
End page 418
Total pages 10
Place of publication Kidlington, Oxford, United Kingdom
Publisher Pergamon
Language eng
Abstract This paper demonstrates the potential of an in situ acoustic backscatter system (ABS) to measure particle dispersion concentrations in small and large scale mixing vessels. The ABS unit employs 1, 2, 4 and 5. MHz transducers that emit ultrasonic pulses and receive the resultant echo backscatter signals, with the strength of the return being related to particle concentration. In small scale studies (where the effect of depth-wise attenuation is effectively ignored), a peak is measured in the strength of the echo responses at intermediate concentrations, due to a balance of the backscatter and attenuation components on the overall signal. The average measured responses were then compared to backscatter theory, which suggested that such analysis is invalid for systems with particle levels greater than ~2.5. g/L and qualitative approaches may be necessary to correlate concentration. More detailed analysis is undertaken in a larger-scale system, where the deviation between expected depth-wise theoretical response and real experimental echo decays are quantified for individual frequencies. It is shown that theoretical estimations heavily over-predict the strength of backscatter echoes at higher particle concentrations, likely due to increasing inter-particle scattering, and such effects are most evident for the highest frequency tested. Because of these limitations, dispersion concentration is correlated using qualitative approaches. For the 4 and 5. MHz responses, which had approximated linear depth-wise decays (on a dB scale), it is found that the gradient of the attenuation decay slope (in dB/m) increases linearly with respect to particle concentration, which allowed the formation of a direct correlation relationship. For the 1 and 2. MHz responses, the interpolated differential is calculated for specific depth points. Again, a linear correlation is established between the gradient of attenuation and particle concentration, where importantly, it was found that this gradient is independent of dispersion depth. This result highlights the possibility of measuring concentration variation in larger scale systems, simply from the associated differential attenuation changes, and indicates the potential of acoustic techniques for the monitoring and characterisation of industrial multiphase systems.
Keyword Dispersion
In situ Characterization
Instrumentation
Particle processing
Process control
Slurries
Q-Index Code C1
Q-Index Status Provisional Code
Institutional Status Non-UQ

Document type: Journal Article
Sub-type: Article (original research)
Collection: Faculty of Engineering, Architecture and Information Technology Publications
 
Versions
Version Filter Type
Citation counts: TR Web of Science Citation Count  Cited 9 times in Thomson Reuters Web of Science Article | Citations
Scopus Citation Count Cited 11 times in Scopus Article | Citations
Google Scholar Search Google Scholar
Created: Fri, 13 Jun 2014, 19:28:32 EST by System User on behalf of Faculty Of Engineering, Architecture & Info Tech