Dewatering properties of dual-polymer-flocculated systems

Glover, Sharna M., Yan, Yao-de, Jameson, Graeme J. and Biggs, Simon (2004) Dewatering properties of dual-polymer-flocculated systems. International Journal of Mineral Processing, 73 2-4: 145-160. doi:10.1016/S0301-7516(03)00070-X


Author Glover, Sharna M.
Yan, Yao-de
Jameson, Graeme J.
Biggs, Simon
Title Dewatering properties of dual-polymer-flocculated systems
Journal name International Journal of Mineral Processing   Check publisher's open access policy
ISSN 0301-7516
Publication date 2004-02-03
Year available 2003
Sub-type Article (original research)
DOI 10.1016/S0301-7516(03)00070-X
Open Access Status Not yet assessed
Volume 73
Issue 2-4
Start page 145
End page 160
Total pages 16
Place of publication Amsterdam, Netherlands
Publisher Elsevier BV
Language eng
Abstract This work examines the effect of dual-polymer flocculation on the compressive yield stress and hindered settling function of positively charged alumina suspensions as measured by a pressure filtration technique. The primary aggregates were formed using a short-chain poly(acrylic acid) (PAA) under two different shear mixing conditions at pH 5. This resulted in two types of aggregates with different mass fractal dimension and size. These aggregates were further flocculated using either a cationic or an anionic long-chain polymer at the same pH. A filtration study of these dual-polymer-induced aggregates showed that there may exist an optimum dosage for the second polymer, which results in the lowest final cake moisture. Dual-polymer flocculation was found to result in lower compressive yield stresses than that found for the case of single, high-molecular-weight polymer flocculation. This gave rise to lower final cake moistures for the dual-polymer-flocculated systems (28.3% w/w) compared to the case of the single, high-molecular-weight polymer-flocculated system (34.7% w/w). The filtration rate was high for the dual-polymer systems in most cases. In addition, the polymer dosage required to achieve good supernatant clarity was decreased from that of the single-polymer case when dual polymers were used. The use of dual-polymer flocculants of opposite charge was found to give an improvement in final cake moisture over that achieved using dual polymers of like charge. The structural characteristics of the primary aggregates were also found to have a significant influence on the dewatering properties of the dual-polymer-induced aggregates. Under the conditions used, large, open primary aggregates led to final flocs with lower cake moisture and faster filtration rate. It is envisaged that optimisation of industrial dewatering processes in this way can result in considerable savings in transportation and enhanced product value.
Keyword Dewatering
Flocculants
Flocculation
Pressure filtration
Settling
Q-Index Code C1
Q-Index Status Provisional Code
Institutional Status Non-UQ

Document type: Journal Article
Sub-type: Article (original research)
Collection: Faculty of Engineering, Architecture and Information Technology Publications
 
Versions
Version Filter Type
Citation counts: TR Web of Science Citation Count  Cited 36 times in Thomson Reuters Web of Science Article | Citations
Scopus Citation Count Cited 37 times in Scopus Article | Citations
Google Scholar Search Google Scholar
Created: Sat, 14 Jun 2014, 05:27:36 EST by System User on behalf of Learning and Research Services (UQ Library)