Browse by all authors Browse By Author Name - Davidson,+C.

Browse Results (36 results found)

Subscribe to the RSS feed for this result setSubscribe to the RSS feed for this result set

  Abstract Views File Downloads Thomson Reuters Web of Science Citation Count Scopus Citation Count Altmetric Score
Hamasaiid, A., Dargusch, M.S., Davidson, C., Loulou, T. and Dour, G. (2007). A Model to Predict the Heat Transfer Coefficient at the Casting-Die Interface for the High Pressure Die Casting Process. In: Elias Cueto and Francisco Chinesta, AIP Conference Proceedings: 10th ESAFORM Conference on Material Forming. 10th ESAFORM Conference on Material Forming, Zaragoza, Spain, (1211-1216). 18-20 April 2007. doi:10.1063/1.2729679 157   0 Cited 0 times in Scopus0 0
Grandfield, J., Davidson, C. J. and Taylor, J. A. (2000). Application of a new hot tearing analysis to horizontal direct chill cast magnesium alloy AZ91. In: K. Ehrke and W. Schneider, Continuous Casting. International Congress on Continuous Casting, Frankfurt, Germany, (205-210). 13-15 October, 2000. 94  
Grandfield, J. F., Davidson, C. J. and Taylor, J. A. (2001). Application of a new hot tearing analysis to horizontal direct chill cast magnesium alloy AZ91. In: J. L. Anjier, Light Metals 2001. 130th TMS Annual Meeting - Light Metals Symposium, New Orleans, LO, USA, (895-901). 11th - 15th February, 2001. 173   14
Mirak A.R., Davidson C.J. and Taylor J.A. (2014). Characterisation of fresh surface films formed on molten Mg-Nd alloy protected by different atmospheres. In: 8th International Workshop on Semiconductor Surface Passivation (SSP), Krakow Poland, (91-98). Sep 08-12, 2013. doi:10.1016/j.apsusc.2014.01.127 12   0 Cited 0 times in Scopus0 0
Mirak, A., Davidson, C. J. and Taylor, J. A. (2010) Characterisation of fresh surface oxidation films formed on pure molten magnesium in different atmospheres. Corrosion Science, 52 6: 1992-2000. doi:10.1016/j.corsci.2010.02.003 53   10 Cited 10 times in Scopus10 0
Mitchell, J. B., Cockcroft, S. L., Viano, D., Davidson, C. and St John, D. (2007) Determination of strain during hot tearing by image correlation. Metallurgical And Materials Transactions A-physical Metallurgy And Materials Science, 38A 10: 2503-2512. doi:10.1007/s11661-007-9221-7 164   18 Cited 21 times in Scopus21 0
Dour, G., Dargusch, M. S., Davidson, C. J., Nef, A. and St John, D. H. (2003). Development of a non intrusive heat transfer coefficient gauge and its application to high pressure die casting. In: A Dahle, Proceedings of the 1st International Light Metal Technology Conference 2003. Light Metals Technology Conference 2003, Brisbane, Australia, (155-160). 18-20 September 2003. 75  
Dour, G., Dargusch, M. S., Davidson, C. and Nef, A. (2005) Development of a non-intrusive heat transfer coefficient gauge and its application to high pressure die casting Effect of the process parameters. Journal of Materials Processing Technology, 169 2: 223-233. doi:10.1016/j.jmatprotec.2005.03.026 67   41 Cited 47 times in Scopus47 0
Hamasaiid, A., Dargusch, M. S., Davidson, C. J., Tovar, S., Loulou, T., Rezai-Aria, F. and Dour, G. (2007) Effect of mold coating materials and thickness on heat transfer in permanent mold casting of aluminum alloys. Metallurgical and Materials Transactions A, 38A 6: 1303-1316. doi:10.1007/s11661-007-9145-2 285   18 Cited 28 times in Scopus28 0
Yao, X., Dahle, A. K., Davidson, C. J. and St John, D. H. (2006) Effect of solute on the growth rate and the constitutional undercooling ahead of the advancing interface during solidification of an alloy and the implications for nucleation. Journal Of Materials Research, 21 10: 2470-2479. doi:10.1557/JMR.2006.0302 142   3 Cited 3 times in Scopus3 0
Caceres, C.H., Davidson, C.J., Griffiths, J.R. and Newton, C.L. (2002) Effects of solidification rate and ageing on the microstructure and mechanical properties of AZ91 alloy. Materials Science And Engineering A-structural Materials Properties Microstructure And Processing, 325 1-2: 344-355. doi:10.1016/S0921-5093(01)01467-8 189   123 0
Davidson, C. J., Griffiths, J. R. and Zanada, A. (2004). Fatigue Properties Of Squeeze, Semisolid And Gravity Diecast Al-Si-Mg Alloy. In: Atrens, A., Boland, J. N., Clegg, R. and Griffiths, J. R., Structural Integrity and Fracture International Conference (SIF'04), Brisbane, Australia, (79-84). 26-29 September 2004. 435 2378
Bowles, A. L., Nogita, K., Dargusch, M. S., Davidson, C. and Griffiths, J. (2004) Grain size measurements in Mg-Al high pressure die castings using electron back-scattered diffraction (EBSD). Materials Transactions, 45 11: 3114-3119. doi:10.2320/matertrans.45.3114 104   11 Cited 11 times in Scopus11 0
Hamasaiid, A., Dour, G., Dargusch, M. S., Loulou, T., Davidson, C. and Savage, G. (2006). Heat transfer at the casting/die interface in high pressure die casting - experimental results and contribution to modelling. In: Charles-AndreĢ Gandin and Michel Bellet, Modeling of casting, welding, and advanced solidification processes - XI : proceedings from the Eleventh International Conference on Modeling of Casting, Welding and Advanced Solidification Processes. Eleventh International Conference on Modeling of Casting, Welding and Advanced Solidification Processes, Opio, France, (). 28 May - 2 June, 2006. 212  
Hamasaiid, A., Dour, G., Dargusch, M.S., Loulou, T., Davidson, C. and Savage, G. (2008) Heat-transfer coefficient and in-cavity pressure at the casting-die interface during high-pressure die casting of the magnesium alloy AZ91D. Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 39A 4: 853-864. doi:10.1007/s11661-007-9452-7 25   18 Cited 22 times in Scopus22 0
Lu, L., Dahle, A.K., Davidson, C. and St John, D.H. (2007). Hot Tearing of Al-Si Alloys. In: Sorlie, M., Proceedings of the technical sessions presented by the TMS Aluminium Commission. Light Metals 2007, Orlando, Florida, USA, (721-726). February 25 - March 1 2007. 107   0 Cited 0 times in Scopus0
Sweet, L., Easton, M. A., Taylor, J. A., Davidson, C. J., Lu, L., Couper, M. J. and St John, D. H. (2012). Hot tear susceptibility of Al-Mg-Si alloys with varying iron contents. In Minerals, Metals and Materials Society (Ed.), Supplemental Proceedings: Materials Properties, Characterization, and Modeling, Volume 2 presented by the TMS Aluminum Committee at the TMS 2012 141st Annual Meeting & Exhibition, Orlando, Florida, USA, March 11-15, 2012 (pp. 275-282) Hoboken, NJ, USA: John Wiley & Sons. doi:10.1002/9781118357002.ch36 67   0 Cited 0 times in Scopus0 0
Hamasaiid, A., Wang, G., Davidson, C., Dour, G. and Dargusch, M. S. (2009) Interfacial heat transfer during die casting of an Al-Si-Cu alloy. Metallurgical and materials transactions. A, Physical metallurgy and materials science, 40 13: 3056-3058. doi:10.1007/s11661-009-0048-2 130   4 Cited 6 times in Scopus6 0
Yao, X., Dargusch, M.S., Dahle, A.K., Davidson, C.J. and St John, D.H. (2008) Investigation into the effect of nucleation parameters on grain formation during solidification using a cellular automaton-finite control volume method. Journal of Materials Research, 23 9: 2312-2325. doi:10.1557/JMR.2008.0303 26   3 Cited 4 times in Scopus4 0
Caceres, C. H., Griffiths, J. R., Pakdel, A. R. and Davidson, C. J. (2005) Microhardness mapping and the hardness-yield strength relationship in high-pressure diecast magnesium alloy AZ91. Materials Science And Engineering A, 402 1-2: 258-268. doi:10.1016/j.msea.2005.04.042 422   39 Cited 14 times in Scopus14 0
Yao, X., McDonald, S. D., Dahle, A. K., Davidson, C. J. and St John, D. H. (2008) Modeling of grain refinement: Part I. Effect of the solute titanium for aluminum. Journal of Materials Research, 23 5: 1282-1291. doi:10.1557/JMR.2008.0153 65   3 Cited 4 times in Scopus4 0
Yao, X., McDonald, S.D., Dahle, A.K., Davidson, C.J. and St John, D.H. (2008) Modeling of grain refinement: Part II. Effect of nucleant particles-TiB2 additions for aluminum. Journal of Materials Research, 23 5: 1292-1300. doi:10.1557/JMR.2008.0154 85   4 Cited 4 times in Scopus4 0
Yao, X., McDonald, S. D., Dahle, A. K., Davidson, C. J. and St John, D. H. (2008) Modeling of grain refinement: Part III. Al-7Si-0.3Mg aluminum alloy. Journal of Materials Research, 23 5: 1301-1306. doi:10.1557/JMR.2008.0155 129   1 Cited 1 times in Scopus1 0
Yao, X., Davidson, C. J., Dahle, A. K. and St John, D. H. (2002) Modelling of microstructure formation and evolution during solidification. International Journal of Cast Metals Research, 15 3: 219-223. 176   2 Cited 4 times in Scopus4
Davidson, C., Viano, D., Lu, L. and St John, D. (2006) Observation of crack initiation during hot tearing. International Journal of Cast Metals Research, 19 1: 59-65. doi:10.1179/136404606225023291 77   15 Cited 18 times in Scopus18 0
Dour, G, Dargusch, M and Davidson, C (2006) Recommendations and guidelines for the performance of accurate heat transfer measurements in rapid forming processes. International Journal of Heat And Mass Transfer, 49 11-12: 1773-1789. doi:10.1016/j.ijheatmasstransfer.2005.10.045 82   27 Cited 33 times in Scopus33 0
Wang, H., Davidson, C. J. and St John, D. H. (2003). Semi-solid casting of A356 alloy produced by controlled pouring. In: A Dahle, Proceedings of the 1st International Light Metal Technology Conference 2003. Light Metals Technology Conference 2003, Brisbane, Australia, (219-222). 18-20 September 2003. 60  
Wang, H., Davidson, C. J., Taylor, J. A. and St John, D. H. (2002). Semisolid casting of AlSi7Mg0.35 alloy produced by low-temperature pouring. In: P. J. Gregson and S. Harris, Materials Science Forum: Proceedings of the 8th International Conference on Aluminium Alloy. 8th International Conference on Aluminium Alloys, Cambridge, England, (143-148). 2-5 July, 2002. 143   15
Wang, H., Davidson, C. J. and St John, D. H. (2004) Semisolid microstructural evolution of AlSi7Mg alloy during partial remelting. Materials Science And Engineering A-structural Materials Properties Microstructure And Processing, 368 1-2: 159-167. doi:10.1016/j.msea.2003.10.305 182   29 Cited 35 times in Scopus35 0
Wang, Q. G., Praud, M., Needleman, A., Kim, K. S., Griffiths, J. R., Davidson, C. J., Caceres, C. H. and Benzerga, A. A. (2010) Size effects in aluminium alloy castings. Acta Materialia, 58 8: 3006-3013. doi:10.1016/j.actamat.2010.01.032 20   7 Cited 7 times in Scopus7 0
Grandfield, J. F., Taylor, J. A. and Davidson, C. J. (2002). Tensile coherency in semi-solid AZ91 alloy. In: Howard I Kaplin, Magnesium Technology 2002. 131st TMS Annual Meeting - Magnesium Technology Symposium, Seattle, WA, USA, (207-213). 17-21 February 2002. 50  
Dargusch, M.S., Hamasaiid, A., Dour, G., Loulou, T., Davidson, C.J. and St John, D.H. (2007) The accurate determination of heat transfer coefficient and its evolution with time during high pressure die casting of Al-9%Si-3%Cu and Mg-9%Al-1%Zn alloys. Advanced Engineering Materials, 9 11: 995-999. doi:10.1002/adem.200700189 85   10 Cited 14 times in Scopus14 0
Grandfield, J. F., Davidson, C. J. and Taylor, J. A. (2001). The columnar to equiaxed transition in horizontal direct chill cast magnesium alloy AZ91. In: J. L. Anjier, Light Metals 2001. 130th TMS Annual Meeting - Light Metals Symposium, New Orleans, LO, USA, (911-916). 11th - 15th February, 2001. 87   12
Caceres, C. H., Davidson, C. J., Griffiths, J. R. and Wang, Q. G. (1999) The effect of Mg on the microstructure and mechanical behaviour of two Al-Si-Mg casting alloys. Metallurgical and Materials Transactions A, 30 10: 2611-2618. doi:10.1007/s11661-999-0301-8 54   62 Cited 67 times in Scopus67 0
Stangeland, A., Mo, A., MHamdi, M., Viano, D. and Davidson, C. (2006) Thermal strain in the mushy zone related to hot tearing. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science 35A, 37 3: 705-714. doi:10.1007/s11661-006-0042-x 56   20 Cited 22 times in Scopus22 0
Wang, H., Ning, Z. L., Yao, X., Davidson, C J and St John, D. H. (2004) Thixotropic structure formation in hypoeutectic Al-Si alloys by controlled nucleation. Materials Forum, 28 1316-1321. 74