| |
|
|
|
|
Chanson, Hubert and Cummings, Peter D. (1996) Air-Water Interface Area in Supercritical Flows Down Small-Slope Chutes. CE151, Department of Civil Engineering, The University of Queensland.
|
408 |
176 |
|
|
Toombes, L. and Chanson, H. (2005) Air-Water Mass Transfer on a Stepped Waterway. Journal of Environmental Engineering, 131 10: 1377-1386.
|
482 |
329 |
8
|
|
Carosi, Giovanna and Chanson, Hubert (2006) Air-Water Time and Length Scales in Skimming Flows on a Stepped Spillway: Application to the Spray Characterisation. CH59/06, Division of Civil Engineering, The University of Queensland.
|
571 |
495 |
|
|
Dahle, A. K. and St John, D. H. (2000) A K Dahle and D H St John, "Prevent banded defects in high-pressure diecast magnesium alloys", Invited Feature Article. Modern Casting, 90 2: 43-46.
|
15 |
|
|
|
Macrossan, M. N. and Oliver, R. I. (1993) A kinetic theory solution method for the Navier-Stokes equations. International Journal for Numerical Methods in Fluids, 17 3: 177-193.
|
262 |
153 |
13
|
|
Chau, K. W. and Albermani, F. G. (2005) A knowledge-based system for liquid retaining structure design with blackboard architecture. Building And Environment, 40(1) -: 73-81.
|
17 |
|
2
|
|
Gilfillan, W. N., Pohl, J. H. and Dixon, T. (2001). A Laboratory Rig for Testing the Deposition of Ash from Sugar Cane Bagasse. In: , Proceedings of JPGC'01: 2001 International Joint Power Generation Conference. Proceedings of JPGC'01:2001 International Joint Power Generatn, New Orleans, (1-10). 4 June - 7 June.
|
7 |
|
|
|
Baldock, T. E., Swan, C. and Taylor, P. H. (1996) A Laboratory Study of Nonlinear Surface Waves on Water. Philosphical Transactions of the Royal Society: Mathematical, Physical and Engineering Sciences, 354 : 649-676.
|
414 |
338 |
|
|
Hall, BJ, Schaffer, GB, Ning, Z, McPhee, WAG, Miller, DN, Drennan, J and Cumming, DJ (2003) Al/AlN layered composites by direct nitridation of aluminum. Journal of Materials Science Letters, 22 22: 1627-1630.
|
28 |
|
3
|
|
Williams, D J, Rohde, T K, Stolberg, D. J. and Pope, G (2006). Alernative design and instrumentation of covers over potentially acid forming mine wastes. In: H R Thomas, Fifth International Congress on Environmental Geotechnics. Fifth International Congress on Environmental Geotechnics, Wales, United Kingdom, (1007-1014). 26-30 June 2006.
|
10 |
|
|
|
Riley, Kathleen and Marks, Peter Aligning technology for best business results. Edited by Gui Wang (translater) x: Design Insight, 1995.
|
3 |
|
|
|
Qian, M., Graham, D., Zheng, L., St John, D. H. and Frost, M. T. (2003) Alloying of pure magnesium with Mg-33.3 wt-%Zr master alloy. Materials Science And Technology, 19 2: 156-162.
|
34 |
|
14
|
|
Asokanthan, S. F. and Ariaratnam, S. T. (2000) Almost-sure stability of a gyropendulum subjected to white-noise random support motion. Journal of Sound & Vibration, 235 5: 801-812.
|
4 |
|
1
|
|
Williams, D. J. and Bentel, G.M. (2001). Alternative approaches to closure of tailings storage facilities. In: B. Ohlander, Proceedings of International Conference on Mining and the Environment. Securing the Future, Skelleftea, Sweden, (915-924). 14-18 October 2001.
|
18 |
|
|
|
Williams, David J. and Bentel, G. M. (2001). Alternative approaches to closure of tailings storage facilities in an arid climate. In: International Conference on Mining and the Environment - Securing the Future, Skelleftea, Sweden, (915-924). 25 June-1 July 2001.
|
54 |
|
|
|
Taylor, J. A., Otte, M. O. and Mcdonald, S. D. (1999) Aluminium alloy castability. Materials Australia, 31 5: 16-18.
|
42 |
|
|
|
Dahle, A. K., St John, D. H., Attavanich, P. and Taopetch, P. (2000) Aluminium alloys - their physical and mechanical properties: Grain formation in AlSi7Mg0.35 foundry alloy at low superheat. Materials Science Forum, 331-337 : 271-276.
|
429 |
|
6
|
|
Nogita, K, McDonald, SD, Tsujimoto, K, Yasuda, K and Dahle, AK (2004) Aluminium phosphide as a eutectic grain nucleus in hypoeutectic Al-Si alloys. Journal of Electron Microscopy, 53 4: 361-369.
|
44 |
|
15
|
|
Schaffer, G. B. and Sercombe, T. B. (2005) Aluminium prototypes by selective laser sintering and infiltration - A review of progress to date. Materials Forum, 29 : 93-97.
|
42 |
|
|
|
Lilley, Charles R. and Macrossan, Michael N. (2004) A Macroscopic Chemistry Method for the Direct Simulation of Gas Flows. Physics of Fluids, 16 6: 2054-2066.
|
484 |
235 |
6
|
|
Wong, HH, ONeill, BK and Middelberg, APJ (1997) A mathematical model for Escherichia coli debris size reduction during high pressure homogenisation based on grinding theory. Chemical Engineering Science, 52 : 2883-2890.
|
32 |
|
14
|
|
Stagnitti, F., Li, L., Allinson, G, Phillips, I., Lockington, D., Zeiliguer, A., Allinson, M., Lloyd-Smith, J. and Xie, M. (1999) A mathematical model for estimating the extent of solute- and water-flux heterogeneity in multiple sample percolation experiments. Journal of Hydrology, 215 1-4: 59-69.
|
34 |
|
27
|
|
Papadopolos, Z., Pleasants, P. and Kasner, G. (2004) A maximum density rule for surfaces of quasicrystals. Ferroelectrics, 305 : 21-24.
|
14 |
|
|
|
Bettles, Colleen Joyce, Forwood, Christopher, StJohn, David, Frost, Malcolm, Jones, Darryl, Qian, Ma, Song, Guangling, Griffiths, John and Nie, Jian Feng (2003). AMC-SCI: An elevated temperature magnesium alloy suitable for precisiion sand casting of powertrain components. In: Howard I. Kaplan, Magnesium Technology 2003: proceedings of the jointly sponsored by the Magnesium Committee of the Light Metals Division (LMD) and the Solidification Committee of the Materials Processing and Manufacturing Division of TMS (the Minerals, Metals & Materials . Magnesium Technology 2003, San Diego, California, (223-226). 2-6 March 2003.
|
37 |
|
|
|
Qiu, D., Taylor, J. A., Zhang, M.-X. and Kelly, P. M. (2007) A mechanism for the poisoning effect of silicon on the grain refinement of Al-Si alloys. Acta Materialia, 55 4: 1447-1456.
|
46 |
|
3
|
|
Nesic, S. and Lee, K. L. J. (2003) A mechanistic model for carbon dioxide corrosion of mild steel in the presence of protective iron carbonate films - Part 3: Film growth model. Corrosion, 59 7: 616-628.
|
483 |
|
21
|
|
Mathieu, K., Carrick, J. and Marosszeky, M. (2004). A Method For Cleavage Fracture Testing Of Hardwood Laminated Veneer Lumber. In: Atrens, A., Boland, J. N., Clegg, R. and Griffiths, J. R. Structural Integrity and Fracture International Conference (SIF'04), Brisbane, Australia, (257-263). 26-29 September 2004.
|
517 |
709 |
|
|
Rudolph, V. and Lecomte, D. (2003). A method for dehydration of liquid wastes. PTP100001223.
|
30 |
|
|
|
Barnett, R. S., Taylor, J. A. and St John, D. H. (2003). A method for reducing hot tearing in 356 alloy air-intake manifolds. In: A Dahle, Proceedings of the 1st International Light Metal Technology Conference 2003. Light Metals Technology Conference 2003, Brisbane, Australia, (175-178). 18-20 September 2003.
|
26 |
|
|
|
Galakhar, A. S., Meehan, P. A., Daniel, W. J. T. and Ding, S. C. (2007). A method of approximate tool wear analysis in cold roll forming. In: Veidt, Martin, Albermani, Faris, Daniel, Bill, Griffiths, John, Hargreaves, Doug, McAree, Ross, Meehan, Paul and Tan, Andy, Proceedings of the 5th Australasian Congress on Applied Mechanics (ACAM 2007). 5th Australasian Congress on Applied Mechanics (ACAM 2007), Brisbane, Australia, (703-708). 10-12 December, 2007.
|
164 |
87 |
|
|
Macrossan, M. N. and Hancock, M. (1996) A method of assessing the effects of artificial dissipation in Navier-Stokes codes. International Journal for Numerical Methods in Fluids, 22 10: 979-985.
|
122 |
35 |
|
|
Yeomans, SR and Atrens, A (2001) A methodology for discipline-specific curriculum development. International Journal of Engineering Education, 17 6: 518-528.
|
79 |
|
1
|
|
Cottman, N. and Dia, H. F. (2000). A methodology for modelling the environmental impacts of intelligent transport systems. In: , Proceedings of the 22nd Conference of Australian Institutes of transport research (CAITR 2000). The 22nd conference of Australian institues of transport research, Australian National University, Canberra, (1-12). 6-8 December 2000.
|
16 |
|
|
|
Weir, F.M., Hughes, M G and Baldock, T.E. (2004). A methodology for predicting berm crest elevation fronting coastal lagoons. In: H Chanson and J Macintosh, 8th National Conference on Hydraulics in Water Engineering. 8th National Conference on Hydraulics in Water Engineering, Gold Coast, Australia, (1-6). 13-16 July 2004.
|
60 |
|
|
|
A Model for Adsorption of Condensable Vapors on Nonporous Materials (2000) . Edited by Bhatia, S. and Sonwane, C.. Second Pacific Basin Conference on Adsorption Science and Tecy, 14/5/00 to 18/5/00, Brisbane.
|
9 |
|
|
|
Bhatia, S. and Sonwane, C. (2000) A model for adsorption of condensable vapors on nonporous materials. Separation and Purification Technology, 20 20: 25-39.
|
25 |
|
5
|
|
Do, D. D. and Do, H. D. (2000) A Model for water adsorption in activated carbon. Carbon, 38 : 767-773.
|
29 |
|
46
|
|
Easton, M. A. and St John, D. H. (2001) A model of grain refinement incorporating alloy constitution and potency of heterogeneous nucleant particles. Acta Materialia, 49 10: 1867-1878.
|
42 |
|
60
|
|
Zhang, M. X., Kelly, P. M. and Gates, J. D. (1999) A model of stress induced martensitic transformation in Fe-Ni-C alloy. Materials Science & Engineering A, 275 : 251-256.
|
30 |
|
8
|
|
Bellette, P., Meehan, P.A. and Daniel, W.J.T. (2007). A model of the wear due to the rolling contact of a wheel over a general rail profile. In: , 14th International Congress on Sound Vibration. ICSV14, Cairns, Australia, (1-8). 9-12 July 2007.
|
64 |
|
|
|
Lai, T., Pullammanappallil, P. and Clarke, W. P. (2003). A model to predict the effect of buffer on the start-up of slurry and leach-bed anaerobic digestion of MSW. In: Thomas H Christensen, Raffaello Cossu and Rainer Stegmann, Sardina 2003 Ninth International Waste Management and Landfill Symposium. Sardina 2003 Ninth International Waste Management and Landfilm, Italy, (1-10). 6-10 October 2003.
|
17 |
|
|
|
Hamasaiid, A., Dargusch, M.S., Davidson, C., Loulou, T. and Dour, G. (2007). A Model to Predict the Heat Transfer Coefficient at the Casting-Die Interface for the High Pressure Die Casting Process. In: Cueto, E. and Chinesta, F., AIP Conference Proceedings, Volume 907. 10th ESAFORM Conference on Material Forming, Zaragoza, Spain, (1211-1216). 18-20 April 2007.
|
80 |
|
|
|
Gupta, J. S. and Bhatia, S. K. (2000) A modified discrete random pore model allowing for different initial surface reactivity. Carbon, 38 1: 47-58.
|
100 |
|
2
|
|
Ismadji, S. and Bhatia, S. K. (2001) A modified pore-filling isotherm for liquid-phase adsorption in activated carbon. Langmuir, 17 5: 1488-1498.
|
24 |
|
19
|
|
Lai, C. D., Xie, M. and Murthy, D. N. P. (2003) A modified Weibull distribution. Ieee Transactions On Reliability, 52 1: 33-37.
|
12 |
|
30
|
|
Belytschko, T, Daniel, WJT and Ventura, G (2002) A monolithic smoothing-gap algorithm for contact-impact based on the signed distance function. International Journal For Numerical Methods In Engineering, 55 1: 101-125.
|
23 |
|
20
|
|
Lu, Hao Feng, Li, Feng, Liu, Gang, Chen, Zhi-Gang, Wang, Da-Wei, Fang, Hai-Tao, Lu, Gao Qing, Jiang, Zhou Hua and Cheng, Hui-Ming (2008) Amorphous TiO2 nanotube arrays for low-temperature oxygen sensors. Nanotechnology, 19 40: Article Number: 405504.
|
11 |
|
4
|
|
Nigarnjanagool, S. and Dia, H F (2006). A multi-agent approach to real-time traffic signal optimisation. In: , The 29th Australasian Transport Research Forum 2006. The 29th Australasian Transport Research Forum 2006, Surfers Paradise, Queensland, Australia, (1-16). 27-29 September 2006.
|
40 |
|
|
|
Wang, F. and Cameron, I. T. (2005). A multi-form modelling approach to the dynamics and control of drum granulation processes. In: Dr Matt Hardin, 33rd Australasian Chemical Engineering Conference. CHEMECA, Brisbane, Queensland, Australia, (1-6). 25-28 September 2005.
|
35 |
|
|
|
Wang, F. Y. and Cameron, I. T. (2007) A multi-form modelling approach to the dynamics and control of drum granulation processes. Powder Technology, 179 1-2: 2-11.
|
12 |
|
|
