| |
|
|
|
|
|
Dinnis, C., Taylor, John A., Dahle, Arne K., St John, David H. and Schneider, W. (2003). The role of manganese and iron in porosity formation in Al-Si foundry alloys. In: , Light metals: Proceedings of the 42nd Annual Conference of Metallurgists: Global Solutions for Metals and Materials. Proceedings of the 42nd Annual Conference of Metallurgists, Pennsylvannia, U.S.A., (483-497). 24 - 27 August, 2003.
|
47 |
|
|
|
|
Miller, D. N., Lu, and Dahle, A K (2006) The role of oxides in the formation of primary iron intermetallics in an Al-11.6Si-0.37Mg Alloy. Metallurgical and Materials Tranactions B, 37 6: 873-878.
|
48 |
|
9
|
Cited 9 times in Scopus9
|
|
Kootsookos, A. and Gates, J. D. (2008) The role of secondary carbide precipitation on the fracture toughness of a reduced carbon white iron. Materials Science and Engineering: A, 490 1-2: 313-318.
|
84 |
|
2
|
Cited 4 times in Scopus4
|
|
Robertson, Brett and Radcliffe, David (2007). The role of software tools in influencing creative problem solving in engineering design and education. In: , ASME Conference Proceedings: Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conferences-2006. 3rd Symposium on International Design and Design Education, Philadelphia, Pennsylvania, USA, (999-1007). 10-13 September 2006.
|
169 |
|
|
0
|
|
St John, D. H. (2000). The role of solidification in determining the quality of Al and Mg castings. In: N J Kim and G L Dunlop, Joint Australia-Korea Workshop on Light Alloys (CD-Rom). Joint Australia-Lorea Workshop on Light Alloys, Cheju, Korea, (61-64). 25-26 May 2000.
|
16 |
|
|
|
|
Lee, Y. C., Dahle, A. K. and St John, D. H. (2000) The role of solute in grain refinement of magnesium. Metallurgical and Materials Transactions A, 31 11: 2895-2906.
|
57 |
|
234
|
|
|
Bainbridge, I. F., Taylor, J. A. and Dahle, A. K. (2004) The role of surface tension and oxide film strength on the surface formation of vertical direct chill cast products. Materials Forum Aluminium alloys - Their Physical and Mechanical Properties, 28 2004 (CD): 1297-1302.
|
48 |
|
|
|
|
Nogita, K, Yasuda, H, Yoshiya, M, McDonald, SD, Takeuchi, A and Suzuki, Y (2010) The role of trace element segregation in the eutectic modification of hypoeutectic Al-Si alloys. Journal of Alloys and Compounds, 489 2: 415-420.
|
62 |
|
12
|
Cited 14 times in Scopus14
|
|
Nave, M., Dahle, A. K. and St John, D. H. (2000). The role of zinc in the eutectic solidification of magnesium-aluminium-zinc alloys. In: H. I. Kaplan, J. N. Hryn and B. B. Clow, Magnesium Technology 2000. TMS Annual Meeting 2000, Nashville, TN, USA, (243-250). 12-16 March 2000.
|
99 |
|
13
|
|
|
Tirtey, S. C., Boyce, R. R., Brown, L. and Creagh, M. (2011). The SCRAMSPACE I scramjet flight experiment feasibility study. In: AIAC14 Fourteenth Australian International Aerospace Congress, Melbourne, Australia, (). 28 February-3 March 2011.
|
81 |
109 |
|
|
|
Tirtey, S. C., Boyce, R. R., Brown, L., Creagh, M. and Ogawa, H. (2011). The SCRAMSPACE I Scramjet Flight Experiment – Scientific rationale and technical developments. In: L. Ouwehand, Proceedings of the 7th European Symposium on Aerothermodynamics. 7th Aerothermodynamics Symposium, Brugge, Belgium, (). 9-12 May 2011.
|
105 |
6 |
|
|
|
Atrens, A, Baroux, B and Mantel, M (1997) The secondary passive film for type 304 stainless steel in 0.5 M H2SO4. Journal of The Electrochemical Society, 144 11: 3697-3704.
|
114 |
|
23
|
|
|
Xia, Y., Luo, S. D., Wu, X., Schaffer, G. B. and Qian, M. (2013) The sintering densification, microstructure and mechanical properties of gamma Ti-48Al-2Cr-2Nb alloy with a small addition of copper. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 559 : 293-300.
|
11 |
|
0
|
Cited 1 times in Scopus1
|
|
Sercombe, T. B. and Schaffer, G. B. (2010) The sintering of an Fe-Cr-Ni-B-C powder. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 528 2: 751-755.
|
20 |
|
2
|
Cited 2 times in Scopus2
|
|
Yang, Y. F., Luo, S. D., Schaffer, G. B. and Qian, M. (2012) The sintering, sintered microstructure and mechanical properties of Ti-Fe-Si Alloys. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 43A 12: 4896-4906.
|
26 |
|
1
|
0
|
|
Yang, K. Vanna, Caceres, C. H., Nagasekhar, A. V. and Easton, M. A. (2012) The skin effect and the yielding behavior of cold chamber high pressure die cast Mg-Al alloys. Materials Science and Engineering A: Structural Materials: Properties, Microstructures and Processing, 542 : 49-55.
|
21 |
|
1
|
Cited 1 times in Scopus1
|
|
Yang, K., Nagasekhar, A.V. and Caceres, C.H. (2010). The skin effect in a high pressure die cast Mg-9%Al alloy. In: Zhengyi Jiang and Chunliang Zhang, Advanced Materials Research: Manufacturing Science and Engineering I. International Conference on Manufacturing Science and Engineering (ICMSE 2009), Zhuhai, Peoples Republic of China, (743-747). 26-28 December, 2009.
|
97 |
7 |
3
|
Cited 2 times in Scopus2
|
|
Yang, K. V., Caceres, C. H., Easton, M. A. and Gibson, M. A. (2011) The skin effect in a high pressure die cast Mg-La alloy. Kovove Materialy, 49 3: 207-212.
|
30 |
|
1
|
Cited 1 times in Scopus1
|
|
Yang, K., Nagasekhar, A. V., Caceres, C. H. and Easton, M. (2010). The skin effect in an Mg-RE high pressure die cast alloy. In: Jian-Feng Nie and Allan Morton, PRICM7: Selected peer review papers from the seventh Pacific Rim International Conference on Advanced Materials and Processing. 7th Pacific Rim International Conference on Advanced Materials and Processing (PRICM 7), Cairns, QLD, Australia, (691-694). 2-6 August 2010.
|
85 |
14 |
0
|
0
|
|
Yang, Kun Vanna, Nagasekhar, Anumalasetty Venkata, Lumley, Roger and Caceres, Carlos Horacio (2010). The skin effect in high pressure die casting Al alloys. In: Shinji Kumai, Osamu Umezawa, Yoshimasa Takayama, Takayuki Tsuchida and Tatsuo Sato, Proceedings of the 12th International Conference on Aluminium Alloys. The 12th International Conference on Aluminium Alloys (ICAA12), Yokohama, Japan, (687-692). 5-9 September 2010.
|
57 |
298 |
|
|
|
Ming, RS, Pan, J, Norton, MP, Wende, S and Huang, H (1999) The sound-field characterisation of a power transformer. Applied Acoustics, 56 4: 257-272.
|
126 |
|
1
|
|
|
Ali, Msm, Doolan, CJ and Wheatley, V (2011) The sound generated by a square cylinder with a splitter plate at low Reynolds number. Journal of Sound and Vibration, 330 15: 3620-3635.
|
21 |
|
1
|
Cited 1 times in Scopus1
|
|
Wu, YQ, Zou, J, Cui, J, Lin, JH, Wu, R and Jiang, ZM (2007) The stability of faceted SiGe quantum dots capped with a thin Si layer. Nanotechnology, 18 2: 025404-1-025404-4.
|
47 |
|
5
|
Cited 4 times in Scopus4
|
|
Stewart, B. S., Jacobs, P.A. and Morgan, R. G. (2002). The starting processes of an expansion tube nozzle. In: , Proceedings of the Twenty-Third International Symposium on Shock Waves. Twenty-Third International Symposium on Shock Waves, The University of Texas at Arlington, USA, (565-571). 23-27 July, 2001.
|
30 |
|
|
|
|
Joy, J T (2006). The status of risk management in Australian mining - A best practice manual. In: Angie Spry, Kristy Pocock and Jennifer Hall, Conference Proceedings - International Mine Management Conference 2006. International Mine Management Conference 2006, Grand Hyatt, Melbourne, Australia, (267-270). 16-18 October 2006.
|
94 |
|
|
|
|
Spencer, K., Conlon, K. T., Brechet, Y. and Embury, J. D. (2009) The strain induced martensite transformation in austenitic stainless steels: Part 2 - Effect of internal stresses on mechanical response. Materials Science and Technology, 25 1: 18-28.
|
53 |
|
8
|
Cited 7 times in Scopus7
|
|
Spencer, K., Veron, M., Yu-Zhang, K. and Embury, J. D. (2009) The strain induced martensite transformation in austenitic stainless steels: Part 1 - Influence of temperature and strain history. Materials Science and Technology, 25 1: 7-17.
|
91 |
|
16
|
Cited 17 times in Scopus17
|
|
Caceres, C. H. and Blake, A. (2002) The strength of concentrated Mg-Zn solid solutions. Physica Status Solidi A-applied Research, 194 1: 147-158.
|
43 |
|
39
|
Cited 43 times in Scopus43
|
|
Hall, Sandra J. (Sandra Jae) (2003). The study and development of microbial quantification methods for use in activated sludge PhD Thesis, School of Molecular and Microbial Sciences, The University of Queensland.
|
162 |
1 |
|
|
|
Daniel, WJT (1997) The subcycled Newmark algorithm. Computational Mechanics, 20 3: 272-281.
|
51 |
|
12
|
|
|
Yan, M., Yu, P., Kim, K. B., Lee, J. K., Schaffer, G. B. and Qian, M. (2010) The surface structure of gas-atomized metallic glass powders. Scripta Materialia, 62 5: 266-269.
|
85 |
|
8
|
Cited 10 times in Scopus10
|
|
Wong, W. L. P. and Radcliffe, D. F. (2000) The tacit nature of design knowledge. Technology Analysis & Strategic Management, 12 4: 493-512.
|
37 |
|
20
|
Cited 37 times in Scopus37
|
|
Beasley, Peter M. and McAree, Peter R. (2010). The tactical movement problem. In: Bevan B. Beamish and David Cusack, Proceedings of the 2010 Australian Mining Technology Conference: Technology Changing the Mining Business Footprint. 2010 Australian Mining Technology Conference, Perth, WA, Australia, (21-34). 13-15 September 2010.
|
61 |
67 |
|
|
|
Beasley, Peter M. and McAree, Peter R. (2012). The tactical movement problem: solution by linear relaxation. In: , Proceedings of the 2012 Australian Mining Technology Conference. 2012 Australian Mining Technology Conference, Perth, Australia, (175-184). 8-10 October 2012.
|
19 |
6 |
|
|
|
Otarawanna, S., Gourlay, C.M., Laukli, H.I. and Dahle, A.K. (2009) The thickness of defect bands in high-pressure die castings. MATERIALS CHARACTERIZATION, 60 12: 1432-1441.
|
29 |
|
6
|
Cited 4 times in Scopus4
|
|
Radcliffe, D. F. (2001). The Thiess-UQ strategic learning partnership. In: Les Dawes, Wageeh Boles and Anthony Maeder, Proceedings of the 12th Australasian Conference on Engineering Education, 7th Australasian Women in Engineering Forum. 12th Australasian Conference on Engineering Education, 7th Australasian Women in Engineering Forum, Queensland University of Technology, Brisbane, (181-186). 26-28 September, 2001.
|
25 |
|
|
|
|
Kelly, Patrick M. and Qiu, Dong (2011). The Topological Model (TM) of martensite transformations – Some improvements. In: Yves Brechet, Emmanuel Cloet, Alexis Deschamps, Alphonse Finel and Frédéric Soisson, Solid-solid phase transformations in inorganic materials : peer reviewed papers from the conference on Phase Transformations in Inorganic Materials (PTM). International Conference on Solid-Solid Phase Transformations in Inorganic Materials, PTM 2010, Avignon, France, (25-30). 6 -11 June 2010.
|
54 |
6 |
0
|
0
|
|
Christian, Kerrie Anne (2004). The Twenty Year Effect - Avoiding Back To The Future Scenarios In Failure Analysis. In: Atrens, A., Boland, J. N., Clegg, R. and Griffiths, J. R. Structural Integrity and Fracture International Conference (SIF'04), Brisbane, Australia, (41-46). 26-29 September 2004.
|
265 |
520 |
|
|
|
Beamish, B. B., Heath, A., White, B., Howarth, D. F. and Radcliffe, D. F. (2001). The undergraduate site learning program (USLP) at the University of Queensland - One year on. In: , Proceedings of The AusIMM Youth Congress 2001. The AusIMM Youth Congress 2001, Brisbane, Australia, (65-69). 2-6 May 2001.
|
26 |
|
0
|
|
|
Spencer, K., Fabijanic, D.M. and Zhang, M.X. (2009) The use of Al-Al2O3 cold spray coatings to improve the surface properties of magnesium alloys. SURFACE & COATINGS TECHNOLOGY, 204 3: 336-344.
|
78 |
|
29
|
Cited 31 times in Scopus31
|
|
Poynton, Steve, Brandt, Milan and Grandfield, John (2010). The use of electromagnetic fields for the detection of inclusions in aluminium. In: J. A. Taylor, J. F. Grandfield and A. Prasad, Aluminium cast house technology XI: Selected, peer reviewed papers from the International conference, organised by the CAST CRC on behalf of the aluminium industry. 11th International Conference on Aluminium Cast House Technology, Gold Coast, Qld, Australia, (155-162). 13-16 September, 2009.
|
68 |
2 |
0
|
Cited 1 times in Scopus1
|
|
Spencer, K. and Zhang, M.X. (2009) The use of kinetic metallization to form intermetallic reinforced composite coatings by post-spray heat treatment. SURFACE & COATINGS TECHNOLOGY, 203 20-21: 3019-3025.
|
33 |
|
10
|
Cited 12 times in Scopus12
|
|
Rhamdhani, MA and Brooks, GA (2003) The use of secondary ion mass spectrometry for investigating oxygen in pyrometallurgical reactions. Metallurgical And Materials Transactions B-process Metallurgy And Materials Processing Science, 34 3: 355-358.
|
26 |
|
4
|
Cited 3 times in Scopus3
|
|
Taylor, J.A., Prakash, M., Pereira, G.G., Cleary, P.W. and Rohan, P. (2009). The use of smooth particle hydrodynamics to model dross formation during crucible tipping of aluminium melts. In: Lee, P.D., Mitchell, A. and Williamson, R., Liquid Metal Processing and Casting (LMPC 2009). International Symposium on Liquid Metal Processing and Casting, Sante Fe, New Mexico, (353-361). 20-23 September 2009.
|
114 |
|
|
|
|
Crichton, Michael L., Donose, Bogdan C., Chen, Xianfeng, Raphael, Anthony P., Huang, Han and Kendal, Mark A.F. (2011) The viscoelastic, hyperelastic and scale dependent behaviour of freshly excised individual skin layers. Biomaterials, 32 20: 4670-4681.
|
37 |
|
12
|
Cited 11 times in Scopus11
|
|
Kwon, J. A. and Truss, R. W. (2002) The work of fracture in uniaxial and biaxial oriented unplasticised polyvinylchloride pipes. Engineering Fracture Mechanics, 69 5: 605-616.
|
94 |
|
6
|
Cited 7 times in Scopus7
|
|
Kwon, J. and Truss, R. W. (1999). The work of fracture in uniaxial and biaxial oriented vinyl pipes. In: Lin Ye and Yiu wing Mai, International Workshop on Fracture Mechanics and Advanced Engineering Materials. International Workshop on Fracture Mechanics and Advanced Engineering Materials, The University of Sydney, (411-418). 8-10 December, 1999.
|
38 |
|
|
|
|
Guduru, Ramesh K., Nagasekhar, Anumalasetty V., Scattergood, Ronald O., Koch, Carl C. and Murty, Korukonda L. (2007) Thickness and Clearance Effects in Shear Punch Testing. Advanced Engineering Materials, 9 3: 157-160.
|
115 |
|
0
|
0
|
|
Wang, W. X., Wang, Y. P., Zhang, X. G., Wang, Y., Zou, J. and Han, X. F. (2010). Thickness dependence of magnetic and transport properties in organic-CoFe discontinuous multilayers. In: , Proceedings of the 11th Joint MMM-Intermag Conference. 11th Joint MMM-Intermag Conference, Washington, D.C., United States, (09E307-1-09E307-3). 18-22 January 2010.
|
46 |
2 |
2
|
|
|
Li, Chun, Bando, Yoshio, Zhi, Chunyi, Huang, Yang and Golberg, Chunyi (2009) Thickness-dependent bending modulus of hexagonal boron nitride nanosheets. Nanotechnology, 20 38: .
|
13 |
|
27
|
Cited 22 times in Scopus22
|
