School of Mechanical & Mining Engineering Publications

Browse Results (4512 results found)

Subscribe to the RSS feed for this result setSubscribe to the RSS feed for this result set

Page 7 of 91

Result Pages:    « first ‹ previous  1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16  next › last »

  Abstract Views File Downloads Thomson Reuters Web of Science Citation Count Scopus Citation Count Altmetric Score
Little, J., Nehring, M. and Topal, E. (2008). A new mixed-integer programming model for mine production scheduling optimisation in sublevel stope mining. In: P. Knights and P. J. A. Lever, Proceedings of: 2008 Australian Mining Techology Conference. 2008 Australian Mining Techology Conference, Twin Waters, Sunshine Coast, QLD, (167-172). 16-18 September, 2008. 178  
Yao, Xiaolong, Li, Liqing, Li, Hailong, He, Suoying, Liu, Zheng and Ma, Weiwu (2014) A new model for calculating the adsorption equilibrium constant of water vapor in micropores of activated carbon. Computational Materials Science, 89 137-141. doi:10.1016/j.commatsci.2014.03.037 21   0 Cited 0 times in Scopus0 0
Tiedje, Niels Skat, Taylor, John A. and Easton, Mark A. (2013) A new multi-zone model for porosity distribution in Al-Si alloy castings. Acta Materialia, 61 8: 3037-3049. doi:10.1016/j.actamat.2013.01.064 19   2 Cited 3 times in Scopus3 0
Wu, Y. Q., Barry, J., Yamamoto, T., Gu, Q. F., McDonald, S. D., Matsumura, S., Huang, H. and Nogita, K. (2012) A new phase in stoichiometric Cu6Sn5. Acta Materialia, 60 19: 6581-6591. doi:10.1016/j.actamat.2012.08.024 98   6 Cited 8 times in Scopus8 0
Ding, S., Daniel, W. J. T. and Meehan, P. A. (2006). A new relaxation method for roll forming problems. In: J. A. C. Martins, H. C. Rodrigues, J. A. C. Ambrosio and et al., III European Conference on Computional Mechanics: Book of Abstracts. III European Conference on Computional Mechanics Solids, Structures and Coupled Problems in Engineering, Lisbon, Portugal, (536-536). 5-8 June 2006. doi:10.1007/1-4020-5370-3_536 218   0
Iskandar, B. P., Murthy, D. N. P. and Jack, N. (2005) A new repair-replace strategy for items sold with a two-dimensional warranty. Computers & Operations Research, 32 3: 669-682. doi:10.1016/j.cor.2003.08.011 47   37 Cited 46 times in Scopus46 0
Gildfind, David E. and Morgan, Richard G. (2014) A new shock tube configuration for studying dust-lifting during the initiation of a coal dust explosion. Journal of Loss Prevention in the Process Industries, 29 1: 198-208. doi:10.1016/j.jlp.2014.02.011 75 1 0 Cited 0 times in Scopus0 0
Micah Nehring and Topal, E. (2009). A New Short-Term Production Scheduling and Machine Allocation Model Using Mixed Interger Programming for Application in Sublevel Stope Mining Operations. In: Peter Knights and Paul J.A. Lever, Proceedings of the 2009 Australian Mining Technology Conference. 2009 Australian Mining Technology Conference, Brisbane, Australia, (116-133). 27-28 October 2009. 114  
Zhang, M., Reilly, K. and Kelly, P. M. (1999) A new surface - alloying technique for pure copper. Journal of Materials Research, 14 8: 3271-3274. doi:10.1557/JMR.1999.0442 74   2 0
Liu, Sheng, Gu, Yuantong and Huang, Han (2011) A new tip area function for instrumented nanoindentation at extremely small contact depths. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 528 27: 7948-7951. doi:10.1016/j.msea.2011.07.025 70   8 Cited 8 times in Scopus8 0
Xing, Zheng, Chen, Zhi-Gang, Zong, Xu and Wang, Lianzhou (2014) A new type of carbon nitride-based polymer composite for enhanced photocatalytic hydrogen production. Chemical Communications, 50 51: 6762-6764. doi:10.1039/c4cc00397g 67   3 Cited 3 times in Scopus3 0
Han, P. D. and Zou, J. (1998) A new type of dissociated misfit dislocation in [001] ZnTe/GaAs strained-layer heterostructures. Applied Physics Letters, 72 19: 2424-2426. doi:10.1063/1.121374 41   3 Cited 3 times in Scopus3 0
Deulin, Evgenii A., Galakhar, Alexander S. and Basmanov, Mikhail S. (2009). A new type of wide-range vacuum sensor. In: Industrial Technology, 2009, ICIT 2009, IEEE International Conference on. IEEE International Conference on Industrial Technology, ICIT 2009, Churchill, VIC, (). 10 - 13 February 2009. doi:10.1109/ICIT.2009.4939520 9   Cited 0 times in Scopus0 0
Qian, Ma, StJohn, D. H. and Frost, M. T. (2004). A new zirconium-rich master alloy for the grain refinement of magnesium alloys. In: K. U. Kainer, Magnesium: Proceedings of the 6th International Conference Magnesium Alloys and Their Applications. 6th International Conference Magnesium Alloys and Their Applications, Wolfsburg, (707-712). 18-20 November, 2003. doi:10.1002/3527603565.ch112 544   0
McIntyre, T. J., Eichmann, T. N., Lourel, I., Hajek, K. M. and Rubinsztein-Dunlop, H. (2005). An expansion tube study of high enthalpy carbon-dioxide flows. In: Shock waves : proceedings of the 24th International Symposium on Shock Waves. 24th International Symposium on Shock Waves, Beijing, Peoples Republic of China, (107-112). 11-16 July 2004. 57   0
Wang, S. Q., Huang, H.W., Shang, Z. T., Huang, H., Sheng, S. M. and HQ, M. (2005) An experimental investigation of effects of electrolytes on the formation of oxide films involved in ELID grinding. Precision Manufacturing and Automation, 164 4: 14-23. 52  
Shang, Z. T., Huang, H., Sheng, X. M. and Mi, H. Q. (2007) An experimental investigation of ELID high speed grinding technology for silicon nitride ceramics. Hunan Daxue Xuebao, 34 12: 30-34. 72  
Huang, H and Yin, L (2006) An experimental investigation of fabrication mechanisms of optic fibre end faces using nano/microindentation and nanogrinding. International Journal of Nanomanufacturing, 1 1: 47-61. 68  
Freebairn, G. S., Boyce, R. R. and Mudford, N. R. (2009). An experimental investigation of hypersonic transverse jet interactions in laminar, transitional and turbulent flows. In: Proceedings of the 6th European Symposium on Aerothermodynamics for Space Vehicles. The 6th European Symposium on Aerothermodynamics for Space Vehicles, Versailles, France, (). 3-6 November, 2008. 62   Cited 0 times in Scopus0
D'Souza, M. G., Eichmann, T. N., Potter, D. F., Mudford, N. R., Morgan, R. G. and McIntyre, T. J. (2010). An experimental investigation of radiation over an ablating stardust model at 9.8 KM/S. In: 61st International Astronautical Congress 2010 (IAC 2010). 61st International Astronautical Congress 2010, IAC 2010, Prague, (10981-10990). 27 September - 1 October 2010. 31   Cited 0 times in Scopus0
Xie, G. Z. and Huang, Han (2008) An experimental investigation of temperature in high speed deep grinding of partially stabilized zirconia. International Journal of Machine Tools & Manufacture, 48 14: 1562-1568. doi:10.1016/j.ijmachtools.2008.06.002 114   18 Cited 21 times in Scopus21 0
Huang, Han, Huang, Q., Zhu, X. H. and Hu, X. Z. (1993) An experimental investigation of the strength of individual brown corundum abrasive grains. Scripta Metallurgica et Materialia, 29 3: 299-304. doi:10.1016/0956-716X(93)90503-K 55   1 0
Azadi, Mohsen, Gheisari, Reza and Ansari, Mohammad Reza (2014) An experimental investigation on the effect of middle length and inclination angle of S-shaped channel on two-phase flow patterns. Experimental Thermal and Fluid Science, 58 36-47. doi:10.1016/j.expthermflusci.2014.06.019 18   0 Cited 0 times in Scopus0 0
Huang, Hui, Huang, Guoqin, Xu, Xipeng and Huang, Han (2013) An experimental study of machining characteristics and tool wear in the diamond wire sawing of granite. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227 7: 943-953. doi:10.1177/0954405413478262 43   0 Cited 0 times in Scopus0 0
Rohde, A. and Veidt, M. (2008). An experimental study of plate wave diffraction tomography. In: Denier, J., Finn, M. and Mattner. T., XXII International Congress of Theoreetical and Applied Mechanics. ICTAM 2008, Adelaide, Australia, (1-2). 25-29 August 2008. 65  
Dehkhoda, Sevda and Hood, Michael (2013) An experimental study of surface and sub-surface damage in pulsed water-jet breakage of rocks. International Journal of Rock Mechanics and Mining Sciences, 63 138-147. doi:10.1016/j.ijrmms.2013.08.013 25   1 Cited 1 times in Scopus1 0
Aminossadati, S. M. and Mee, D. J. (2013) An experimental study on aerodynamic performance of turbine nozzle guide vanes with trailing-edge span-wise ejection. Journal of Turbomachinery, 135 3: 031002.1-031002.12. doi:10.1115/1.4006663 162 5 0 Cited 0 times in Scopus0 0
Nagasekhar, A.V., Yoon, S.C., Tick-Hon, Y. and Kim, H.S. (2009) An experimental verification of the finite element modelling of equal channel angular pressing. Computational Materials Science, 46 2: 347-351. doi:10.1016/j.commatsci.2009.03.018 96   28 Cited 27 times in Scopus27 0
Zhao, M.C., Schmutz, P., Brunner, S., Liu, M., Song, G.L. and Atrens, A. (2009) An exploratory study of the corrosion of Mg alloys during interrupted salt spray testing. Corrosion Science, 51 6: 1277-1292. doi:10.1016/j.corsci.2009.03.014 113   65 Cited 78 times in Scopus78 0
Qiu, D, Shen, YX and Zhang, WZ (2006) An extended invariant line analysis for fcc/bcc precipitation systems. Acta Materialia, 54 2: 339-347. doi:10.1016/j.actamat.2005.09.009 78   8 Cited 8 times in Scopus8 0
Song, G., Atrens, A. and St John, D. H. (2001). An hydrogen evolution method for the estimation of the corrosion rate of magnesium alloys. In: J N Hyrn, Magnesium Technology 2001. Magnesium Technology 2001, New Orleans, USA, (255-262). 11-15 Feb 2001. 1195   66
Sheehan, Gregory John, Wong, Fook-Sin, Hourn, Michael Matthew, Kodama, Manabu and Hughes, David (2000). Anhydrous magnesium chloride. 6,143,270. 110 5
Wang, Shiliang, He, Shiliang, Huang, Han, Zou, Jin, Auchterlonie, Graeme John, Hou, Lizhen and Huang, Baiyun (2013) An improved loop test for experimentally approaching the intrinsic strength of alumina nanoscale whiskers. Nanotechnology, 24 28: 285703.1-285703.7. doi:10.1088/0957-4484/24/28/285703 69   1 Cited 1 times in Scopus1 0
Aminossadati, Saiied, Bowen, Warwick, Sheridan, Eoin, Amanzadeh, Mohammad and Kizil, Mehmet (2013) An innovative fibre optic based methane sensor Brisbane, Australia: ACARP 14  
Shi, ZM and Atrens, A (2011) An innovative specimen configuration for the study of Mg corrosion. Corrosion Science, 53 1: 226-246. doi:10.1016/j.corsci.2010.09.016 107   66 Cited 68 times in Scopus68 0
Shi, Zhiming and Atrens, Andrej (2011). An innovative specimen for Mg corrosion studies. In: Hajo Dieringa, Norbert Hort and Karl Ulrich Kainer, Light Metals Technology V: Selected, peer reviewed papers from the 5th International Conference on Light Metals Technology. 5th International Conference on Light Metals Technology, Luneburg, Germany, (365-368). 19-22 July 2011. doi:10.4028/www.scientific.net/MSF.690.365 72 70 1 Cited 1 times in Scopus1 0
Veeraragavan, A., Pesala, Balasubrahmanyam and Sujith, R. I. (2006). An integral approach to modeling sound propagation through a finite combustion zone. In: 44th AIAA Aerospace Sciences Meeting and Exhibit Online Proceedings (2006). 44th AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada, United States, (). 9 – 12 January 2006. 51  
Yang, Quangang and Reidsema, Carl (2006) An integrated intelligent design advisor system in engineering design. Cybernetics and Systems, 37 6: 609-634. doi:10.1080/01969720600734644 60   1 Cited 4 times in Scopus4 0
Bolhar, Robert, Ring, Uwe, Kemp, Anthony I. S., Whitehouse, Martin J., Weaver, Steve D., Woodhead, Jon D., Uysal, I. Tonguc and Turnbull, Rose (2012) An integrated zircon geochronological and geochemical investigation into the Miocene plutonic evolution of the Cyclades, Aegean Sea, Greece: part 2-geochemistry. Contributions to Mineralogy and Petrology, 164 6: 915-933. doi:10.1007/s00410-012-0759-z 64   3 Cited 3 times in Scopus3 0
Pillai, Krishna M. and Hooman, Kamel (2013). An introduction to medeling flows in porous media. In Reza Masoodi and Krishna M. Pillai (Ed.), Wicking in porous materials: traditional and modern modeling approaches (pp. 55-96) Boca Raton, FL, United States: CRC Press. 26  
Pillai, Krishna M. and Hooman, Kamel (2013). An introduction to modeling flows in porous media. In Reza Masoodi and Krishna M. Pillai (Ed.), Wicking in porous materials: traditional and modern modeling approaches (pp. 55-96) Boca Raton, Florida: CRC Press. doi:10.1201/b12972-5 81 9 0
StJohn, D. H., Easton, M. A. and Qian, Ma (2009). An inverse growth restriction model for predicting solidified grain size. In: Steve L. Cockcroft and Daan M. Maijer, Modeling of Casting, Welding, and Advanced SolidificationProcesses-XII : Proceedings from the Twelfth International Conference on Modeling of Casting, Welding and Advanced Solidification Processes. 12th International Conference on Modeling of Casting, Welding and Advanced Solidification Processes, Vancouve, Canada, (477-484). 7-14 June 2009. 163   1 Cited 0 times in Scopus0
Dargusch, M. S., Hamasaiid, A. and Dour, G. (2008) An inverse model to determine the heat transfer coefficient and its evolution with time during solidification of light alloys. International Journal of Nonlinear Sciences and Numerical Simulation, 9 3: 275-282. doi:10.1515/IJNSNS.2008.9.3.275 84   2 Cited 2 times in Scopus2 0
Rashid, R. A. Rahman, Sun, S., Wang, G. and Dargusch, M. S. (2012) An investigation of cutting forces and cutting temperatures during laser-assisted machining of the Ti-6Cr-5Mo-5V-4Al beta titanium alloy. International Journal of Machine Tools and Manufacture, 63 58-69. doi:10.1016/j.ijmachtools.2012.06.004 99   11 Cited 16 times in Scopus16 0
Daniel, Bill (W. J. T.), Jones, Rhys, Mohan, Sajith, Pal, Sarvesh, Farjoo, Mohammadalli and Kerr, Malcolm (2011). An investigation of rail squats from several perspectives. In: 9th World Congress on Railway Research (WCRR 2011): Conference proceedings. 9th World Congress on Railway Research (WCRR 2011), Lille, France, (). 22 - 26 June 2011. 237 12
Huang, H, Dallimore, MP, Pan, J and McCormick, PG (1998) An investigation of the effect of powder on the impact characteristics between a ball and a plate using free falling experiments. Materials Science And Engineering A-structural Materials Properties Microstructure And Processing, 241 1-2: 38-47. doi:10.1016/S0921-5093(97)00470-X 85   24 Cited 28 times in Scopus28 0
Dong, Zhigang, Huang, Han and Kang, Renke (2010) An investigation of the onset of elastoplastic deformation during nanoindentation in MgO single crystal (001) and (110) planes. Materials Science And Engineering A Structural Materials Properties Microstructure And Processing, 527 16-17: 4177-4184. doi:10.1016/j.msea.2010.03.037 106   9 Cited 8 times in Scopus8 0
Lilley, Charles R. and Macrossan, Michael N. (2002) An investigation of the Sutherland molecular model for DSMC simulations. 9/2002, Department of Mechanical Engineering, The University of Queensland. 730 337
Sun, Haiqing and Shi, Yinong (2009) An investigation on Hall-Petch relationship in electrodeposited nanocrystalline Cu-Ni-P Alloys. 材料科学技术学报 (英文版) [Journal of Materials Science & Technology], 25 3: 347-350. 51   1 Cited 3 times in Scopus3
Nehring, M., Topal, E., Kizil, M. and Knights, P. (2010). An investigation to integrate optimum long-term planning with short planning in underground mine production scheduling. In: P. A. Dowd, Mine Planning and Equipment Selection – MPES 2010 Proceedings. MPES2010: Mine Planning and Equipment Selection, Freemantle, Western Australia, (141-153). 1-3 December, 2010. 130 13

Page 7 of 91

Result Pages:    « first ‹ previous  1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16  next › last »