| |
|
|
|
|
|
Atrens, A. and Truss, R. W. (2001). Curriculum design to tailor an undergraduate site learning program (USLP) in materials engineering. In: Les Dawes and Wageeh Boles and Anthony Maeder, 12th Australian Conference on Engineering. Towards Excellence in Engineering Education, Brisbane, Qld, (127-132). 26-28 Sept 2001.
|
49 |
|
|
|
|
Felberbaum, M. and Rappaz, M. (2011) Curvature of micropores in Al–Cu alloys: An X-ray tomography study. Acta Materialia, 59 18: 6849-6860.
|
34 |
|
4
|
Cited 6 times in Scopus6
|
|
Mahmoudi-Kohan, Nadali, Eghbal, Mehdi and Parsa Moghaddam, Mohsen (2011). Customer recognition-based demand response implementation by an electricity retailer. In: , AUPEC 2011 proceedings. 21st Australasian Universities Power Engineering Conference (AUPEC 2011), Brisbane, Australia, (-6). 25-28 September 2011.
|
31 |
11 |
|
|
|
Hoffman, Mark, Salz, Chris, Westram, Ilona and Roedel, Juergen (2004). Cyclic Fatigue Crack Growth In PZT Piezoelectric Ceramics Induced By Mechanical Load. In: Atrens, A., Boland, J. N., Clegg, R. and Griffiths, J. R. Structural Integrity and Fracture International Conference (SIF'04), Brisbane, Australia, (). 26-29 September 2004.
|
591 |
495 |
|
|
|
Wang, Q. G., Caceres, C. H. and Griffiths, J. R. (2003) Damage by eutectic particle cracking in aluminum casting alloys A356/357. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 34 12: 2901-2912.
|
333 |
|
46
|
Cited 55 times in Scopus55
|
|
Caceres, C. H. (2001) Damage by particle cracking and the quality index of Al-Si-Mg casting alloys. AFS Transactions, 108 : 709-712.
|
483 |
|
|
|
|
Horton, C., Gurgenci, H., Veidt, M. and Guan, Z. (1999). Damage detection in practical mechanical structures. In: , Euromech 401: Inverse Methods in Structural Dynamics. Euromech 401: Inverse Methods in Structural Dynamics, Dept of Mechanical Engineering, The Univ. of Liverpool, (1). 6-7 September 1999.
|
30 |
|
|
|
|
Ujjin, R., Crosky, A., Schmidt, L., Kelly, D., Li, R. and Carr, D. (2004). Damage Development During Pin Loading Of A Hole In A Quasi-Isotropic Carbon Fibre Reinforced Epoxy Composite. In: Atrens, A., Boland, J. N., Clegg, R. and Griffiths, J. R. Structural Integrity and Fracture International Conference (SIF'04), Brisbane, Australia, (359-365). 26-29 September, 2004.
|
369 |
912 |
|
|
|
Liew, Chin Kian and Veidt, Martin (2011). Damage evaluation in smart materials using time-frequency analysis. In: Zhongning Guo, Proceedings of ADME 2011. 2011 International Conference on Advanced Design and Manufacturing Engineering, ADME 2011, Guangzhou, China, (2299-2306). 16 -18 September 2011.
|
48 |
1 |
|
0
|
|
Tan, H. H., Williams, J. S., Zou, J., Cockayne, D. J. H., Pearton, S. J. and Stall, R. A. (1996) Damage to epitaxial GaN layers by silicon implantation. Applied Physics Letters, 69 16: 2364-2366.
|
13 |
|
89
|
Cited 98 times in Scopus98
|
|
Veeraragavan, Ananthanarayanan and Cadou, Christopher P. (2008). 2D analytical model investigating the effect of structural heat recirculation on the temperature profiles in a parallel plate reactor with a premixed laminar flame. In: , Proceedings of ASME 2007 International Mechanical Engineering Congress and Exposition (IMECE2007). ASME International Mechanical Engineering Congress and Exposition (IMECE2007), Seattle, WA, United States, (853-864). 11-15 November 2007.
|
19 |
|
0
|
|
|
Nagasekhar, A. V., Caceres, C. H. and Kong, C. (2010) 3D characterization of intermetallics in a high pressure die cast Mg alloy using focused ion beam tomography. Materials Characterization, 61 11: 1035-1042.
|
44 |
|
5
|
Cited 5 times in Scopus5
|
|
Zhou, Wei, Sunarso, Jaka, Motuzas, Julius, Liang, Fengli, Chen, Zhigang, Ge, Lei, Liu, Shaomin, Julbe, Anne and Zhu, Zhonghua (2011) Deactivation and regeneration of oxygen reduction reactivity on double perovskite Ba2Bi0.1Sc0.2Co1.7O6-x cathode for intermediate-Ttmperature solid oxide fuel cells. Chemistry of Materials, 23 6: 1618-1624.
|
41 |
|
6
|
Cited 8 times in Scopus8
|
|
Ong, Lee-Ling, Upcroft, Ben, Ridley, Matthew, Bailey, Tim, Sukkarieh, Salah and Durrant-Whyte, Hugh (2005). Decentralised data fusion with particles. In: Sammut, Claude, Proceedings of the 2005 Australasian Conference on Robotics & Automation. Australasian Conference on Robotics and Automation 2005, Sydney, Australia, (). 5-7 December, 2005.
|
39 |
|
|
|
|
Ridley, M., Upcroft, B., Ong, Lee Ling, Kumar, S. and Sukkarieh, S. (2004). Decentralised Data Fusion With Parzen Density Estimates. In: , Proceedings of the 2004 Intelligent Sensors, Sensor Networks & Information Processing Conference. Intelligent Sensors, Sensor Networks and Information Processing Conference, Melbourne, Australia, (161-166). 14-17 Dec. 2004.
|
29 |
|
|
|
|
Ong, L-L., Bailey, T., Durrant-Whyte, H. and Upcroft, B. (2008). Decentralised particle filtering for multiple target tracking in wireless sensor networks. In: , information Fusion 2008. 11th International Conference on Information Fusion, United States, (342-349). 30 June - 3 July 2008.
|
49 |
|
|
|
|
Liu, Sheng, Huang, Han and Gu, Yuantong (2012) Deconvolution of mechanical properties of thin films from nanoindentation measurement via finite element optimization. Thin Solid Films, 526 : 183-190.
|
15 |
|
0
|
Cited 1 times in Scopus1
|
|
Wang, L., Dimitrijev, S., Han, J.S. and Zou, J. (2007) Deep void formation mechanism in Si(100) during its carbonization reaction with C2H2. Thin Solid Films, 515 17: 6824-6826.
|
43 |
|
0
|
0
|
|
Gourlay, C., Laukli, H. I. and Dahle, A. K. (2007) Defect band characteristics in Mg-Al and Al-Si high-pressure die castings. Metallurgical and materials transactions. A, Physical metallurgy and materials science, 38A 8: 1833-1844.
|
77 |
|
38
|
Cited 40 times in Scopus40
|
|
Wang, Y., Du, X. L., Mei, Z. X., Zeng, Z. Q., Xu, Q. Y., Xue, Q. K. and Zhang, Z. (2004) Defect Characteristics of ZnO Film grown on (0001) Sapphire with an Ultrathin Gallium Wetting Layer. Journal of Crystal Growth, 273 1-2: 100-105.
|
48 |
|
6
|
Cited 6 times in Scopus6
|
|
Kang, Jung-Hyun, Gao, Qiang, Joyce, Hannah J., Tan, Hark Hoe, Jagadish, Chennupati, Kim, Yong, Guo, Yanan, Xu, Hongyi, Zou, Jin, Fickenscher, Melodie A., Smith, Leigh M., Jackson, Howard E. and Yarrison-Rice, Jan M. (2011) Defect-free GaAs/AlGaAs core-shell nanowires on Si substrates. Crystal Growth and Design, 11 7: 3109-3114.
|
52 |
|
13
|
Cited 13 times in Scopus13
|
|
Xu, Hongyi, Wang, Yong, Guo, Yanan, Liao, Zhiming, Gao, Qiang, Tan, H. Hoe, Jagadish, Chennupati and Zou, Jin (2012) Defect-free < 110 > zinc-blende structured InAs nanowires catalyzed by palladium. Nano Letters, 12 11: 5744-5749.
|
37 |
|
2
|
0
|
|
Li, Zhi-Peng, Mori, Toshiyuki, Zou, Jin and Drennan, John (2013) Defects clustering and ordering in di- and trivalently doped ceria. Materials Research Bulletin, 48 2: 807-812.
|
12 |
|
0
|
0
|
|
Chou, C. T., Cockayne, D. J. H., Zou, J., Kringhoj, P. and Jagadish, C. (1995) {111} defects in 1-MeV-silicon-ion-implanted silicon. Physical Review B, 52 24: 17223-17230.
|
20 |
|
18
|
|
|
Dong, Z., Huang, H. and Kang, R. (2009) Deformation and acoustic emission during nanoindentation on single crystal MgO (001) plane. Advanced Materials Research, 76-78 : 404-409.
|
49 |
|
1
|
Cited 1 times in Scopus1
|
|
Sumitomo, Taro, Huang, Han and Zhou, Libo (2011) Deformation and material removal in a nanoscale multi-layer thin film solar panel using nanoscratch. International Journal of Machine Tools and Manufacture, 51 3: 182-189.
|
61 |
|
5
|
Cited 6 times in Scopus6
|
|
He, Anshun, Huang, He and Zhou, Libo (2012) Deformation and removal characteristics of LiTaO3 single crystals in nanoindentation and nanoscratch. International Journal of Abrasive Technology, 5 3: 258-269.
|
24 |
|
|
0
|
|
Nagasekhar, A. V., Tick-Hon, Yip and Seow, H. P. (2007). Deformation behavior and strain homogeneity in equal channel angular extrusion/pressing. In: Yoke-San Wong and Ming-Jen Tan, Journal of Materials Processing Technology: Proceedings of the 7th Asia Pacific Conference on Materials Processing (APCMP 2006). 7th Asia Pacific Conference on Materials Processing (APCMP 2006), National University of Singapore Kent Ridge Guild House, Singapore, (449-452). 4-6 December, 2006.
|
88 |
|
29
|
Cited 30 times in Scopus30
|
|
Dahle, A. K. and Suéry, M. (2010). Deformation behavior of aluminum alloys during solidification. In: A. Roósz, V. Mertinger, P. Barkóczy and C. S. Hoó, Solidification and Gravity V: Selected, peer reviewed papers from the fifth International Conference on Solidification and Gravity. Solidification and Gravity 2008: 5th International Conference on Solidification and Gravity, Miskolc-Lillafüred, Hungary, (337-342). 6-9 September 2008.
|
76 |
11 |
0
|
0
|
|
Yoon, Seung Chae, Nagasekhar, Anumalasetty Venkata, Yoo, Ji Hoon, Abd El Aal, Mohamed Ibrahim, Vaseghi, Majid and Kim, Hyoung Seop (2010) Deformation characteristics evaluation of modified equal channel angular pressing processes. Materials Transactions, 51 1: 46-50.
|
69 |
|
1
|
Cited 2 times in Scopus2
|
|
Huang, Han (2011). Deformation mechanisms and abrasive machining of nanoscale thin film multilayered solar panels: A focused review. In: Taghi Tawakoli, Advances in Abrasive Technology XIV. 14th International Symposium on Advances in Abrasive Technology (ISAAT 2011), Stuttgart, Germany, (42-47). 18-21 September 2011.
|
65 |
4 |
|
0
|
|
Sumitomo, Taro, Kakisawa, Hideki, Owaki, Yusuke and Kagawa, Yutaka (2008). Deformation mechanisms of natural nano-laminar composites: Direct TEM observation of organic matrix in nacre. In: 31st International Conference on Advanced Ceramics and Composites, Daytona Beach, FL, USA, (15-22). 21 - 26 January 2007.
|
21 |
|
1
|
Cited 1 times in Scopus1
|
|
Zhang, MX and Kelly, PM (2001) Deformation twinning of martensite in an Fe-Ni-C alloy. Scripta Materialia, 44 11: 2575-2581.
|
32 |
|
1
|
|
|
Song, G.L., Hapugoda, S. and St John, D. (2007) Degradation of the surface appearance of magnesium and its alloys in simulated atmospheric environments. Corrosion Science, 49 3: 1245-1265.
|
99 |
|
16
|
Cited 21 times in Scopus21
|
|
Veldman, N. L. M., Dahle, A. K., St John, D. H. and Arnberg, L. (2001) Dendrite coherency of Al-Si-Cu alloys. Metallurgical And Materials Transactions A-physical Metallurgy And Materials Science, 32 1: 147-155.
|
232 |
|
31
|
|
|
Zhao, MC, Hanamura, T, Qiu, H, Nagai, K and Yang, K (2006) Dependence of strength and strength-elongation balance on the volume fraction of cementite particles in ultrafine grained ferrite/cementite steels. Scripta Materialia, 54 7: 1385-1389.
|
103 |
|
26
|
Cited 29 times in Scopus29
|
|
Powell, B. J. and McKenzie, Ross H. (2004) Dependence of the superconducting transition temperature of organic molecular crystals on intrinsically nonmagnetic disorder: A signature of either unconventional superconductivity or the atypical formation of magnetic moments. Physical Review B, 69 2: 024519-1-024519-17.
|
356 |
332 |
|
Cited 45 times in Scopus45
|
|
Nogita, K., Hayashi, K., Une, K. and Fukuda, K. (1999) Depth profiles of damage accumulation in UO2 and (U,Gd)O2 pellets irradiated with 100 MeV iodine. Journal of Nuclear Materials, 273 3: 302-309.
|
61 |
|
8
|
|
|
Tsukamoto, Hideaki (2010) Design against fracture of functionally graded thermal barrier coatings using transformation toughening. Materials Science and Engineering A, 527 13-14: 3217-3226.
|
40 |
|
1
|
Cited 1 times in Scopus1
|
|
Veidt, M. and Berezovski, A. (2004). Design And Application Of A Drill Pipe Fatigue Test Facility. In: A. Atrens, J. N. Boland, R .Clegg and J. R. Griffiths, Proceedings of the Structural Integrity and Fracture International Conference (SIF'04). Structural integrity and fracture 2004, Brisbane, Australia, (367-373). 26-29 September, 2004.
|
804 |
5117 |
|
|
|
Huang, H, Winchester, K J, Dell, J M and Faraone, L (2006) Design and development of tunable filters for MEMS adaptive infrared detectors. Nanotechnology and Precision Engineering, 4 1: 38-45.
|
44 |
|
|
Cited 1 times in Scopus1
|
|
Umar Sheikh, Morgan, Richard G., McIntyre, Timothy J., Fabian Zander and Eichmann, Troy N. (2012). Design, Construction and Calibration of a Vacuum Ultraviolet Emission Spectroscopy System for Use on a Blunt Body at Superorbital Velocities. In: 18th International Space Planes and Hypersonic Systems and Technologies Conference, Tours, France, (). 24-28 September, 2012.
|
10 |
|
|
|
|
Yang, Quangang and Reidsema, Carl (2007) Design information handling in a knowledge based intelligent design system. Cybernetics and Systems, 38 5-6: 549-573.
|
20 |
|
2
|
Cited 2 times in Scopus2
|
|
Lawn, B. R. (2004). Designing Layer Structures For Biomechanical Applications. In: Atrens, A., Boland, J. N., Clegg, R. and Griffiths, J. R. Structural Integrity and Fracture International Conference (SIF'04), Brisbane, Australia, (211-212). 26-29 September 2004.
|
210 |
112 |
|
|
|
Goldsmith, R., Reidsema, C., Campbell, D. A., Hadgraft, R. and Levy, D. (2011) Designing the future. Australasian Journal of Engineering Education, 17 1: 1-10.
|
27 |
|
|
|
|
Andersen, Janthea, Nycyk, Michael, Jolly, Lesley and Radcliffe, David (2005). Design management in a construction company. In: David Radcliffe and Josh Humphries, 2005 ASEE/AaeE 4th Global Colloquim of Engineering Education. 2005 ASEE/AaeE 4th Global Colloquium on Engineering Education, Sydney, Australia, (1-10). 26-29 September 2005.
|
1553 |
2800 |
|
|
|
Jazra, Thomas and Smart, Michael K. (2011). Design methodology for the airbreathing second stage of a rocket-scramjet-rocket launch vehicle. In: American Institute of Aeronautics and Astronautics, 17th AIAA international space planes and hypersonic systems and technologies conference 2011. 17th AIAA International Space Planes and Hypersonic Systems and Technologies Conference, San Francisco Bay, CA., USA, (). 11-14 April 2011.
|
38 |
2 |
|
|
|
Smith, AL, Mee, DJ, Daniel, WJT and Shimoda, T (2001) Design, modelling and analysis of a six component force balance for hypervelocity wind tunnel testing. Computers & Structures, 79 11: 1077-1088.
|
226 |
|
9
|
|
|
Doherty, Luke J., Smart, Michael K. and Mee, David J. (2012). Design of an airframe integrated 3-D scramjet and experimental results at a Mach 10 flight condition. In: , Proceedings of the 18th AIAA/3AF International Space Planes and Hypersonics Systems and Technologies Conference. 18th AIAA/3AF International Space Planes and Hypersonics Systems and Technologies Conference, Tours, France, (1-17). 24 - 28 September 2012.
|
34 |
2 |
|
|
|
Tirtey, S. C., Paris, S., Chazot, O. and Fletcher, D. (2004). Design of boundary layer probe payload for EXPERT program. In: D. Danesy, Proceedings of the Fifth European Symposium on Aerothermodynamics for Space Vehicles. Fifth European Symposium on Aerothermodynamics for Space Vehicles, Cologne, Germany, (157-163). 8-11 November, 2004.
|
22 |
|
0
|
|
