| |
|
|
|
|
|
Tirtey, S. C., Chazot, O. and Walpot, L. (2011) Characterization of hypersonic roughness-induced boundary-layer transition. Experiments in Fluids, 50 2: 407-418.
|
52 |
|
0
|
0
|
|
Yao, J. Y. and Taylor, J. A. (2012) Characterization of intermetallic particles formed during solution treatment of an Al-7Si-0.4Mg-0.12Fe alloy. Journal of Alloys and Compounds, 519 : 60-66.
|
33 |
|
1
|
Cited 1 times in Scopus1
|
|
Huang, H., Hu, X. Z., Liu, Y., Bush, M., Winchester, K., Musca, C., Dell, J. and Faraone, L. (2005) Characterization of mechanical properties of silicon nitride thin films for MEMS devices by nanoindentation. Journal of Materials Science and Technology, 21 Suppl. 1: 13-16.
|
159 |
|
5
|
Cited 7 times in Scopus7
|
|
Cáceres, Carlos H., Sivarupan, Tharmalingam and Taylor, John A. (2010). Chemical composition issues regarding the ductility of alloy A319. In: International Conference on Advances in Materials and Manufacturing Processes ICAMMP 2010, Shenzhen, China, (). 6-8 November 2010.
|
148 |
15 |
|
|
|
Macrossan, M. N. and Eckett, C. (1996) Chemical non-equilibrium inviscid flow over a blunt cone at incidence. AIAA Journal, 34 10: 2054-2061.
|
139 |
|
0
|
|
|
Stefan Brieschenk, Philippe Lorrain, Bianca Capra, Russell Boyce, McIntyre, Timothy J., Kleine, H. and O'Byrne. S. (2012). Chemiluminescence Imaging in Supersonic Combustors Operating in Radical-Farming Mode. In: , Proceedings of the 18th International Spaceplanes and Hypersonic Systems and Technologies Conference. 18th International Space Planes and Hypersonic Systems and Technologies Conference, Tours, France, (1-10). 24-28 September, 2012.
|
5 |
1 |
|
|
|
Low, R.J., Qian, Ma and Schaffer, Graham B. (2012). Choloride impurities in titanium powder metallurgy-A review. In: L. Zhou, H. Chang, Y. Lu and D. Xu, Proceedings of the 12th World Conference on Titanium. 12th World Conference on Titanium (Ti-2011 ), Beijing, China, (1770-1774). 19-24 June 2011.
|
67 |
14 |
|
|
|
Pal, Sarvesh, Raman, R. K. Singh and Rihan, R. (2012) Circumventing Practical Difficulties in Determination of Threshold Stress Intensity for Stress Corrosion Cracking of Narrow Regions of Welded Structures. Metallurgical and Materials Transactions A-Physical Metallurgy and Materials Science, 43A 9: 3202-3214.
|
7 |
|
0
|
0
|
|
Zhu, Hanliang, Zhang, Xinquan, Couper, Malcolm J. and Dahle, Arne K. (2009). Classification of streaking defects on anodized aluminium extrusions. In: M. S. Dargusch, S. M. Keay, F. H. Wohlbier, G. Murch and Y.-W. Mai, Materials Science Forum. Light Metals Technology 2009: Proceedings of the Fourth International Light Metals Technology Conference 2009. LMT 2009: 4th International Light Metals Technology Conference, Gold Coast, QLD, Australia, (349-352). 28 June-1 July 2009.
|
163 |
|
3
|
Cited 3 times in Scopus3
|
|
Clean Coal Technologies: Queensland and Wyoming -- the case for cooperation, conference program and proceedings (2008) . Edited by A. O. Klimenko, O. A. Plumb and M. J. Cleary. Clean Coal Technologies: Queensland and Wyoming -- the case for cooperation, 10-11 April, 2008, Customs House, Brisbane Australia.
|
26 |
|
|
|
|
Au, Siu-Kiu, Lam, Heung-Fai and Ng, Ching-Tai (2008) Closure. Journal of Engineering Mechanics, 134 10: 924-925.
|
36 |
|
|
0
|
|
Knights, Peter and Hood, Michael (2010) Coal and the Commonwealth: The greatness of an Australian resource. AusIMM Bulletin, 1: 48-50.
|
51 |
34 |
|
0
|
|
Crosdale, PJ, Beamish, BB and Valix, M (1998) Coalbed methane sorption related to coal composition. International Journal of Coal Geology, 35 1-4: 147-158.
|
205 |
|
85
|
|
|
Kizil, GV and Donoghue, AM (2002) Coal dust exposures in the longwall mines of New South Wales, Australia: a respiratory risk assessment. Occupational Medicine-oxford, 52 3: 137-149.
|
40 |
|
9
|
Cited 10 times in Scopus10
|
|
An, Hui, Song, Tao, Shen, Laihong, Qin, Changlei, Yin, Junjun and Feng, Bo (2012) Coal gasification with in situ CO2 capture by the synthetic CaO sorbent in a 1 kW(th) dual fluidised-bed reactor. International Journal of Hydrogen Energy, 37 19: 14195-14204.
|
31 |
|
1
|
Cited 1 times in Scopus1
|
|
Liu, H., Feng, B., Lu, J. D. and Zheng, C. G. (2005) Coal property effects on N2O and NOx formation from circulating fluidized bed combustion of coal. Chemical Engineering Communications, 192 10-12: 1482-1489.
|
195 |
|
8
|
Cited 10 times in Scopus10
|
|
Terzi, S, Salvo, L, Suery, M and Dahle, AK (2009) Coarsening mechanisms during isothermal holding of a dendritic Al-10wt%Cu alloy. TRANSACTIONS OF THE INDIAN INSTITUTE OF METALS, 62 4-5: 447-449.
|
34 |
|
0
|
0
|
|
Terzi, S., Salvo, L., Suery, M., Dahle, A.K. and Boller, E. (2009) Coarsening mechanisms in a dendritic Al-10% Cu alloy. ACTA MATERIALIA, 58 1: 20-30.
|
34 |
|
19
|
Cited 21 times in Scopus21
|
|
Qian, Ma (2000) Coarsening of intermetallic or compound precipitates in binary systems. Metallurgical and Materials Transactions A, 31A 12: 3195-3197.
|
38 |
|
3
|
|
|
Song, H. S., Zhang, J., Lin, J., Liu, S. J., Luo, J. J., Huang, Y., Elssfah, E. M., Elsanousi, A., Ding, X. X., Gao, J. M. and Tang, Chengcun (2007) Coating aluminum borate (Al18B4O33) nanowire webs with BN. Journal of Physical Chemistry C, 111 3: 1136-1139.
|
19 |
|
6
|
Cited 6 times in Scopus6
|
|
Huang, Y., Lin, J., Ding, X.X., Tang, C., Gu, C.Z. and Qi, S.R. (2007) Coating carbon nanotubes with iron oxide using methanol-thermal reaction. Materials Letters, 61 3: 697-700.
|
28 |
|
8
|
Cited 9 times in Scopus9
|
|
An, Hui, Feng, Bo and Su, Shi (2011) CO2 capture by electrothermal swing adsorption with activated carbon fibre materials. International Journal of Greenhouse Gas Control, 5 1: 16-25.
|
76 |
|
12
|
Cited 15 times in Scopus15
|
|
An, H, Feng, B and Su, S (2009) CO2 capture capacities of activated carbon fibre-phenolic resin composites. CARBON, 47 10: 2396-2405.
|
67 |
|
13
|
Cited 16 times in Scopus16
|
|
Humphries, J. and Radcliffe, D. F. (2004). Coherent design of active online learning environments. In: C Snook and D Thorpe, Proceedings of the 15th Annual AAEE Conference and the 10th Australasian Women in Engineering Forum. Proceedings of the 15th Annual AAEE Conference and the 10th Australasian Women in Engineering Forum, Toowoomba, (289-299). 27-29 September 2004.
|
43 |
|
|
|
|
Wang, Yong, Xiu, Faxian, Wang, Ya, Zou, Jin, Beyermann, Ward P., Zhou, Yi and Wang, Kang L. (2011) Coherent magnetic semiconductor nanodot arrays. Nanoscale Research Letters, 6 1: 1-8.
|
40 |
|
4
|
Cited 5 times in Scopus5
|
|
Qian, Ma (2010) Cold compaction and sintering of titanium and its alloys for near-net-shape or preform fabrication. International Journal of Powder Metallurgy, 46 5: 29-44.
|
184 |
6 |
29
|
Cited 35 times in Scopus35
|
|
Spencer, Kevin, Fabijanic, Daniel and Zhang, Ming Xing (2009). Cold spray of Al-MMC coatings on magnesium alloys for improved corrosion and wear resistance. In: M.S. Dargusch and S. Keay 4th International Conference Organised by the CAST CRC, on Behalf of the Global Light Metals Alliance, Gold Coast, QLD, Austraila, (377-380). 29 June-1 July 2009.
|
89 |
|
0
|
0
|
|
Fernee, H, Nairn, J and Atrens, A (2001) Cold worked Cu-Fe-Cr alloys. Journal of Materials Science, 36 22: 5497-5510.
|
397 |
|
17
|
|
|
Radcliffe, D. F. and Clark, N. (2003). Collaborative design of a global sustainability knowledge network for engineers. In: A. Folkeson, K. Gralen, M. Norell and U. Sellgren, Proceedings of the 14th International Conference on Engineering Design: ICED 03. 14th International Conference on Engineering Design (ICED 03), Stockholm, Sweden, (1-10). 19-21 August 2003.
|
32 |
|
|
|
|
Van Kempen, N. and Radcliffe, D. F. (2001). Collaborative partnerships: Creating and enhancing the Australasian Virtual Engineering Library as a dynamic webspace for engineers. In: Les Dawes, Wageeh Boles and Anthony Maeder, Proceedings of the 12th Australasian Conference on Engineering Education, 7th Australasian Women in Engineering Forum. 12th Australasian Conference on Engineering Education, 7th Aum, Queensland University of Technology, Brisbane, (468-473). 26-28 September, 2001.
|
69 |
|
|
|
|
Peterson, J and Kizil, M. S. (2001). Colorimetric and density analysis of roadway dust. In: , AusIMM Youth Congress. AusIMM Youth Congress, Brisbane, (21-26). 2-6 May 2001.
|
33 |
|
|
|
|
Heiberg, G., Nogita, K., Dahle, A. K. and Arnberg, L. (2002) Columnar to equiaxed transition of eutectic in hypoeutectic aluminium-silicon alloys. Acta Materialia, 50 10: 2537-2546.
|
427 |
|
31
|
|
|
Gu, M. and Asokanthan, S. F. (1999). Combined-discrete-distributed control of a slewing flexible manipulator: Theory and Experiments. In: Han-Fu Chen, Dai-Zhan Cheng and Ji-Feng Zhang, Proceedings of the 14th World Congress of International Federation of Automatic Control. Robotics Automation, Beijing, P.R. China, (83-88). 5-9 July 1999.
|
24 |
|
|
|
|
Daniel, W. J. T. (2002). Combined stiffness and damping control of hourglass motion. In: , Proceedings of Fifth World Congress on Computational Mechanics. Fifth World Congress on Computational Mechanics, Vienna, Austria, (1-10). 7-12 July, 2002.
|
81 |
|
|
|
|
Lu, L, Nogita, K and Dahle, AK (2005) Combining Sr and Na additions in hypoeutectic Al-Si foundry alloys. Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing, 399 1-2: 244-253.
|
106 |
|
14
|
Cited 21 times in Scopus21
|
|
Benfell, KE, Beamish, BB, Crosdale, PJ and Rodgers, KA (1999) Combustion behaviour of Bowen Basin coals. Fuel Processing Technology, 60 1: 1-14.
|
21 |
|
5
|
|
|
Boyce, R. R., Frost, M. and Paull, A. (2002). Combustor and nozzle CFD calculations for the HyShot scramjet flight experiment. In: AIAA/AAAF 11th International Space Planes and Hypersonic Systems and Technologies Conference, Orleans, France, (). 29 Sep - 4 Oct 2002.
|
107 |
|
|
|
|
Kelly, P. M. and Zhang, M. X. (2005) Comments on edge-to-edge matching and the equivalence of the invariant line, Delta g and Moire fringe approaches to the crystallographic features of precipitates. Scripta Materialia, 52 7: 679-682.
|
61 |
|
8
|
Cited 7 times in Scopus7
|
|
Hooman, K., Merrikh, Ali A. and Ejlali, Arash (2007) Comments on “Flow, thermal, and entropy generation characteristics inside a porous channel with viscous dissipation” by S. Mahmud and R.A. Fraser [Int. J. Thermal Sciences 44 (2005) 21–32]. International Journal of Thermal Sciences, 46 6: 614-616.
|
208 |
290 |
6
|
Cited 5 times in Scopus5
|
|
Jack, N, Murthy, DNP and Iskandar, BP (2003) Comments on "Maintenance policies with two-dimensional warranty". Reliability Engineering & System Safety, 82 1: 105-109.
|
25 |
|
1
|
Cited 3 times in Scopus3
|
|
Hooman, K. (2008) Comments on “Viscous-dissipation effects on the heat transfer in a Poiseuille flow” by O. Aydin and M. Avci. Applied Energy, 85 1: 70-72.
|
128 |
269 |
5
|
Cited 4 times in Scopus4
|
|
Halatchev, R. (1999). Company strategy- A basis for production scheduling of an open pit complex. In: , Proceedings of Optimizing with Whittle 1999. Third Biennial Conference - Strategic Mine Planning, Hyatt Regency Hotel Perth, (81-95). 23-24 March 1999.
|
51 |
|
|
|
|
Nairn, JD, Skennerton, SG and Atrens, A (2003) Comparative atmospheric corrosion of primary and cold rolled copper in Australia. Journal of Materials Science, 38 5: 995-1005.
|
73 |
|
6
|
Cited 6 times in Scopus6
|
|
Odabaee, Mostafa, Hooman, Kamel and Gurgenci, Hal (2009). Comparing the Tube Fin Heat Exchangers to Metal Foam Heat Exchangers for Geothermal Applications. In: A. Budd The 2nd Annual Australian Geothermal Energy Conference, Brisbane Australia, (). 11-13 November 2009.
|
55 |
11 |
|
|
|
Metzger, K. A., Daniel, W. J. T. and Ross, C. F. (2005) Comparison of beam theory and finite-element analysis with in vivo bone strain data from the alligator cranium. The Anatomical Record. Part A: Discoveries in Molecular, Cellular, and Evolutionary Biology, 283A 2: 331-348.
|
105 |
253 |
28
|
Cited 29 times in Scopus29
|
|
W. Liu, W. N. Low, B. Feng, J. C. Diniz Da Costa and G.-X. Wang (2008). Comparison of calcium oxide sorbents for CO2 capture at high temperature. In: P. Massarotto, S. D. Golding, X. Fu, C. Wei, G.-X. Wang and V. Rudolph, 2008 Asia Pacific Coalbed Methane Symposium. APCBM 2008 Symposium, Brisbane, Australia, (1-4). 22-24 September 2008.
|
60 |
|
|
|
|
McGuire, J.R. and Mudford, N.R. (2009). Comparison of CFD Simulations with OH-PLIF Visualisation and Surface Measurement of Inlet-Injection Radical Farming Supersonic Combustion. In: 19th Int. Symp. Airbreathing Engines (ISABE2009), Montreal Canada, (1175-1-1175-13). 7-11 Sept 2009.
|
44 |
|
|
|
|
McGuire, Jeff, Boyce, Russell and Mudford, Neil (2005). Comparison of Computational and Experimental Studies on Shock Induced Ignition in Scramjets. In: , A Collection of Technical Papers - 13th AIAA/CIRA International Space Planes and Hypersonic Systems and Technologies Conference. AIAA/CIRA 13th International Space Planes and Hypersonics Systems and Technologies Conference, Capua, Italy, (1637-1652). 16-20 May 2005.
|
95 |
|
|
0
|
|
Sacco, Alessandro, O'Byrne, Sean, Neely, Andrew J., Boyce, Russell R. and Mudford, Neil R. (2006). Comparison of Computation and Measurements in a Supersonic Cavity Combustor. In: , 14th AIAA/AHI International Space Planes and Hypersonic Systems and Technologies Conference - A Collection of Technical Papers. 14th AIAA/AHI Space Planes and Hypersonic Systems and Technologies Conference, National Convention Centre, Canberra, ACT, (148-158). 6-9 November, 2006.
|
44 |
|
|
0
|
|
Lapovok, Rimma, Qian, Ma and Bettles, Colleen (2012). Comparison of different routes for production of CP-Ti powder compacts used as preform for forging of Con-rod. In: Lian Zhou, Hui Chang, Yafeng Lu and Dongsheng Xu, Proceedings of the 12th World Conference on Titanium (Ti-2011 ). 12th World Conference on Titanium (Ti-2011 ), Beijing, China, (1592-1596). 19-24 June 2011.
|
37 |
8 |
|
|
