| |
|
|
|
|
|
Creagh, Michael A. and Mee, David J. (2011). Attitude guidance and control for a spinning, asymmetrical rocket payload. In: , AIAC14 Fourteenth Australian International Aerospace Congress. AIAC14 Fourteenth Australian International Aerospace Congress, Melbourne, Australia, (). 28 February - 3 March 2011.
|
41 |
160 |
|
|
|
Michael Creagh and Mee, David J. (2009). Attitude guidance for spinning vehicles with independent pitch and yaw control. In: , 47th AIAA Aerospace Sciences Meeting including the New Horizons Forum and Aerospace Exposition. 47th AIAA Aerospace Sciences Meeting, Orlando , Florida, USA, (1-16). 5-8 January 2009.
|
53 |
|
|
0
|
|
Creagh, Michael and Mee, David (2010) Attitude guidance for spinning vehicles with independent pitch and yaw control. Journal of Guidance, Control and Dynamics, 33 3: 915-922.
|
120 |
2 |
3
|
Cited 3 times in Scopus3
|
|
Campey, T. J. and Meehan, P. A. (2002) A two degree of freedom mathematical model for the prediction of wear-type rail corrugation Brisbane: Division of Mechanical Engineering, The Univ. of Qld
|
58 |
|
|
|
|
Doolan, C. J. and Morgan, R. G. (1999) A two-stage free piston driver. Shock Waves, 9 4: 239-248.
|
19 |
|
6
|
|
|
Paiman, S., Gao, Q., Joyce, H.J., Tan, H.H., Jagadish, C., Kim, Y., Guo, Y. and Zou, J. (2010). Au-catalyzed InP nanowires: The influence of growth temperature and V/III ratio. In: , COMMAD 2010 Proceedings: 2010 Conference on Optoelectronic and Microelectronic Materials and Devices. 2010 Conference on Optoelectronic and Microelectronic Materials and Devices (COMMAD), Canberra, A.C.T., Australia, (37-38). 12-15 December 2010.
|
42 |
|
|
0
|
|
Liao, Zhi-Ming, Chen, Zhi-Gang, Lu, Zhen-Yu, Xu, Hong-Yi, Guo, Ya-Nan, Sun, Wen, Zhang, Zhi, Yang, Lei, Chen, Ping-Ping, Lu, Wei and Zou, Jin (2013) Au impact on GaAs epitaxial growth on GaAs (111)B substrates in molecular beam epitaxy. Applied Physics Letters, 102 6: 063106.1-063106.5.
|
17 |
|
0
|
0
|
|
Class, A. G., Matkowsky, B. J. and Klimenko, A. Y. (2003) A unified model of flames as gasdynamic discontinuities. Journal of Fluid Mechanics, 491 : 11-49.
|
56 |
|
21
|
Cited 18 times in Scopus18
|
|
Vladimirov, I. G. and Diamond, P. (2002) A uniform white-noise model for fixed-point roundoff errors in digital systems. Automation And Remote Control, 63 5: 753-765.
|
29 |
|
0
|
0
|
|
Radcliffe, D. F., Cribb, G. and Hill, C. M. (2000). Australasian virtual engineering library: Collaborative development of a global resource. In: , Proceedings of the 2000 ASEE Annual Conference & Exposition. 2000 ASEE Annual Conference & Exposition, St. Louis, Missouri, (). 18-21 June, 2000.
|
25 |
|
|
|
|
2004 Australia-China Materials Science Symposium (2005) . Edited by M. Lu, H. Wang, J. Zou and M.X. Zhang. 2004 Australia-China Materials Science Symposium, 22-25 October 2004, Brisbane, Australia.
|
12 |
|
|
|
|
Lu, M., Wang, H., Zou, J. and Zhang, M.X. (2005) 2004 Australia China Materials Science Symposium 22-25 October 2004, Brisbane, Australia: Preface. Journal of Materials Science & Technology, 21 Supp. 1: Cover2-Cover2.
|
35 |
|
0
|
|
|
Shafiee, Shahriar and Knights, Peter (2009). Australian coal driving international development. In Peter Knights and Michael Hood (Ed.), Coal and the Commonwealth: The greatness of an Australian resource (pp. 77-99) [Brisbane, Qld.]: University of Queensland.
|
20 |
|
|
|
|
Mayes, T. I. and Gillies, A. D. S. (2002). Australian Longwall Ventilation. In: , Queensland Mining Industry Health and Safety Conference, 2002. Queensland Mining Industry Health and Safety Conference, Townsville, (151-157). 20 August 2002.
|
31 |
|
|
|
|
2008 Australian Mining Technology Conference: Smart Technologies for Sustaining the Minerals Boom (2008) . Edited by Peter Knights and Paul Lever. 2008 Australian Mining Technology Conference, 16-18 September 2008, Twin Waters, Queensland.
|
30 |
|
|
|
|
2006 Australian Mining Technology Conference "Value through cost control " (2006) . Edited by M. Hood, P. J. A. Lever and P. Knights. 2006 Australian Mining Technology Conference "Value through cost control", 26-27 September, 2006, Hunter Valley, NSW, Australaia.
|
138 |
|
|
|
|
Qian, Ma (2002) Author's Reply. Metallurgical and Materials Transactions A, 33A 6: 1860-1862.
|
30 |
|
0
|
|
|
Cho, Y.H. and Dahle, A.K. (2009) Authors' Reply to Discussion of "The Structure of Al-Si Alloys". Metallurgical and Materials Transactions A - Physical Metallurgy and Materials Science, 40A 5: 1011-1012.
|
41 |
|
0
|
Cited 1 times in Scopus1
|
|
Fullagar, P., Zhou, B. and Fallon, G. (1999) Automated interpretation of geophysical borehole logs for orebody delineation and grade estimation. Mineral resources Engineering, 8 3: 269-284.
|
56 |
|
|
|
|
Palanisamy, S, Nagarajah, C.R. and Iovenitti, P. (2003). Automated ultrasonic classification of defects in aluminium die castings. In: , Transactions of 22nd International Die Casting Congress. 22nd International Die Casting Congress and Exposition, Indianapolis, Indiana, USA,, (93-100). 15-18 September, 2003.
|
18 |
|
|
|
|
Bewley, A., Upcroft, B., Lever, P. and Leonard, S. (2009). Automatic in-bucket volume estimation for dragline operations. In: , Technology solutions for challenging financial times. Australian Mining Technology Conference, Brisbane, (153-167). 27-28 October, 2009.
|
73 |
|
|
|
|
# 周 ç«‹æ³¢ (Zhou, Libo), Huang, Han, # 清水 æ·³ (Shimizu, Jun) and # 江田 弘 (Eda, Hiroshi) (2000) Automatic robotic system for jet engine overhaul: Process development and enhancement for honeycomb repair. 精密工å¦ä¼šèªŒ (Seimitsu Kogakkaishi) [Journal of the Japan Society for Precision Engineering], 66 12: 1895-1900.
|
16 |
|
|
0
|
|
Lever, Paul (2011). Automation and robotics. In Peter Darling (Ed.), SME mining engineering handbook 3rd ed. (pp. 805-824) Littleton, CO, United States: Society for Mining, Metallurgy, and Exploration.
|
74 |
10 |
|
|
|
St John, D. H. (2003). Automotive applications for light metals. In: , The Future of the Motor Car! Emerging Transport Technology Conference. The Future of the Motor Car! Emerging Transport Technology Coe, Adelaide, Australia, (59-64). 28-29 October 2003.
|
66 |
|
|
|
|
Knights, Peter and Franklin, Dennis (2010). Autonomous surface mining equipment: is bigger better?. In: Paul Lever and Peter Knights, 2010 Australian Mining Technology Conference : "Technology changing the mining business footprint". 2010 Australian Mining Technology Conference, Perth, Western Australian, (1-8). 13-15 September 2010.
|
95 |
5 |
|
|
|
Radcliffe, D. F. and Clark, N. (2003). AVEL Sustainability Knowledge Network: Collaboration and Knowledge Exchange in Sustainability. In: R Brown and C Hanahan, National Environment Conference 2003. National Environment Conference 2003, Brisbane, Queensland, (1-5). 18-20 June 2003.
|
33 |
|
|
|
|
Shemshad, J., Aminossadati, S. M. and Kizil, M. S. (2009) Average methane concentration measurement in underground coal mines. Australasian Mine Safety Journal, 2 7: 94-96.
|
44 |
|
|
|
|
Kondratiev, A., Hayes, P. C. and Jak, E. (2005). A viscosity model for fully liquid coal ash slags in the Al2O3-CaO-FeO-MgO-SiO2 system. In: , Proceedings of the 2005 International Conference on Coal Science and Technology. 2005 International Conference on Coal Science and Technology, Okinawa, Japan, (). 9-14 Oct 2005.
|
52 |
|
|
|
|
Walther, J., Robertson, B.F. and Radcliffe, D.F. (2007). Avoiding the potential negative influence of CAD tools on the formation of students' creativity. In: Sondergaard, H. and Hadgraft, R., Proceedings of the 18th Conference of the Australasian Association for Engineering Education. AaeE 2007, Melbourne, Australia, (1-6). 9-13 December 2007.
|
70 |
|
|
|
|
Liew, Chin Kian and Veidt, Martin (2011) A wavelet-based damage detection approach for acousto-ultrasonic in-situ monitoring systems. Key Engineering Materials, 472 : 809-814.
|
80 |
|
1
|
Cited 1 times in Scopus1
|
|
Ding, SC and Duncan, JL (2009) A wide-panel forming process to replace conventional roll forming. INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES, 51 4: 276-283.
|
43 |
|
2
|
Cited 2 times in Scopus2
|
|
Sun, M, Saito, T, Jacobs, PA, Timofeev, EV, Ohtani, K and Takayama, K (2005) Axisymmetric shock wave interaction with a cone: a benchmark test. Shock Waves, 14 5/6: 313-331.
|
76 |
|
5
|
Cited 5 times in Scopus5
|
|
Blinco, James, Bottle, Steven, Colwell, John, Fairfull-Smith, Kathryn and Johnston, Will (2008). Azaphenalene-based nitroxides: a new ring-class for nitroxide-mediated polymerisation. In: , 30APS: Abstract book. 30th Australasian Polymer Symposium (30APS), Melbourne, Australia, (285-286). 30 November - 4 December 2008.
|
42 |
|
|
|
|
Ramanah, D., Raghunath, S., Mee, D. J., Rosgen, T. and Jacobs, P. A. (2007) Background oriented schlieren for flow visualisation in hypersonic impulse facilities. Shock Waves, 17 1-2: 65-70.
|
141 |
|
4
|
Cited 8 times in Scopus8
|
|
Raghunath, S., Mee, D., Roesgen, T. and Jacobs, P. (2005). Background oriented schlieren technique for flow visualisation in shock tunnels. In: G. Jagadeesh, E. Arunan and K. Reddy, Shock Waves: Proceedings of the 25th International Symposium on Shock Waves. 25th International Symposium on Shock Waves- ISSW25, Bangalore, India, (). 17-22 July 2005.
|
69 |
|
|
|
|
Macrossan, Michael N. and Macrossan, Neal W. (2006) Back-Splash in Rowing-Shell Propulsion. Report No. 2006/07, Division of Mechanical Engineering, School of Engineering, The University of Queensland.
|
1595 |
1715 |
|
|
|
Tsukamoto, Hideaki, Nishimura, T., Suenaga, S., McDonald, S. D., Read, J. and Nogita, K. (2009). Ball impact behavior of Sn-Cu (-Ni) lead-free solder joints. In: MA2009: The International Conference and Exhibition on Materials and AustCeram 2009, Gold Coast, QLD, Australia, (). 1-3 July 2009.
|
34 |
|
|
|
|
Lai, C. D., Xie, M. and Murthy, D. N. P. (2001). Bathtub-Shaped Failure Rate Life Distributions. In N. Balakrishnan and C. R. Rao (Ed.), Handbook of Statistics Vol. 20 - Advances in Reliability 20 ed. (pp. 69-104) Netherlands: Elsevier Science B.V..
|
86 |
|
|
|
|
Douillard, B., Upcroft, B., Kaupp, T., Ramos, F. and Durrant-Whyte, H. (2007). Bayesian filtering over compressed appearance states. In: Matthew Dunbabin and Mandyam Srinivasan, Proceedings of the Australasian Conference on Robotics and Automation 2007. Australasian Conference on Robotics and Automation 2007 - ACRA 2007, Brisbane, Australia, (). 10-12 December, 2007.
|
13 |
|
|
|
|
Douillard, Bertrand, Upcroft, Ben, Kaupp, Tobias, Ramos, Fabio and Durrant-Whyte, Hugh (2007). Bayesian filtering over compressed appearance states. In: Matthew Dunbabin and Mandyam Srinivasan, Proceedings of the 2007 Australasian Conference on Robotics & Automation. Australasian Conference on Robotics and Automation 2007, Brisbane, Australia, (). 10 - 12 December 2007.
|
17 |
|
|
|
|
Shao, Y. M., Nie, T. X., Jiang, Z. M. and Zou, J. (2012) Behavior of Au-Si droplets in Si(001) at high temperatures. Applied Physics Letters, 101 5: 053104.1-053104.3.
|
22 |
|
1
|
Cited 2 times in Scopus2
|
|
Qin, Changlei, Yin, Junjun, Liu, Wenqiang, An, Hui and Feng, Bo (2012) Behavior of CaO/CuO based composite in a combined calcium and copper chemical looping process. Industrial and Engineering Chemistry Research, 51 38: 12274-12281.
|
22 |
|
0
|
0
|
|
Stewart, P. C., Ramezanzadeh, A. and Knights, P. (2006). Benchmark drill and blast and mechanical excavation advance rates for underground hard-rock mine development. In: M. Hood, P. Lever and P. Knights, Value through cost control. 2006 Australian Mining Technology Conference, Hunter Valley, NSW, (41-63). 26-27 September 2006.
|
498 |
|
|
|
|
Beamish, Bevan Basil and Beamish, Rowan Timothy (2012). Benchmarking coal self-heating using a moist adiabatic oven test. In: 14th US/North American Mine Ventilation Symposium, Utah, United States, (). 17-20 June 2012.
|
42 |
8 |
|
|
|
Beamish, Basil and Beamish, Rowan (2010). Benchmarking moist coal adiabatic oven testing. In: Naj Aziz and Jan Nemcik, Proceedings of the 10th Underground Coal Operators Conference. COAL 2010: 10th Underground Coal Operators' Conference, The University of Wollongong, NSW, Australia, (264-268). 11-12 February, 2010.
|
71 |
6 |
|
|
|
Bermingham, M. J., McDonald, S. D., StJohn D. H. and Dargusch, M. S. (2009) Beryllium as a grain refiner in titanium alloys. Journal of Alloys and Compounds, 481 1-2: L20-L23.
|
82 |
|
11
|
Cited 11 times in Scopus11
|
|
Knights, P. F. and Oyanader, P. (2005) Best-in-class maintenance benchmarks in Chilean open pit mines. The CIM Bulletin, 98 1088: 93-93.
|
560 |
|
|
|
|
Goldsmith, Rosalie, Reidsema, Carl and Campbell, Duncan (2010). Best practice or business as usual? Whose interests are served by the Engineering Science paradigm?. In: Anne Gardner and Lesley Jolly, 21st annual Conference of the Australasian Association for Engineering Education & 2010 Fall CDIO Collabortators' Meeting: Program & Abstracts. 21st annual Conference of the Australasian Association for Engineering Education & 2010 Fall CDIO Collabortators' Meeting, Sydney, NSW, Australia, (15-15). 5-8 December 2010.
|
20 |
26 |
|
|
|
Zeng, Z. M., Wang, Y., Han, X. F., Zhan, W. S. and Zhang, Z. (2006) Bias Voltage and Temperature Dependence of Magneto-electric Properties in Double-barrier Magnetic Tunnel Junction with Amorphous Co-Fe-B Electrodes. The European Physical Journal B - Condensed Matter and Complex Systems, 52 2: 205-208.
|
36 |
|
1
|
Cited 1 times in Scopus1
|
|
Schaffer, G. B., Huo, S. H. and Lumley, R. N. (2002) Binder treatment and lubricant system for aluminium P/M. International Journal of Powder Metallurgy, 38 8: 35-42.
|
118 |
|
3
|
|
