School of Mechanical & Mining Engineering Publications

Browse Results (5307 results found)

Subscribe to the RSS feed for this result setSubscribe to the RSS feed for this result set

Page 8 of 107

Result Pages:    « first ‹ previous  1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17  next › last »

Refine

  Abstract Views File Downloads Thomson Reuters Web of Science Citation Count Scopus Citation Count Altmetric Score
Micah Nehring and Topal, E. (2009). A New Short-Term Production Scheduling and Machine Allocation Model Using Mixed Interger Programming for Application in Sublevel Stope Mining Operations. In: Peter Knights and Paul J.A. Lever, Proceedings of the 2009 Australian Mining Technology Conference. 2009 Australian Mining Technology Conference, Brisbane, Australia, (116-133). 27-28 October 2009. 137  
Gildfind, David and Morgan, Richard G. (2016). A new sliding joint to accommodate recoil of a free-piston driven expansion tube. In: The 30th International Symposium on Shock Waves, Tel Aviv, Israel, (). 19-24 July 2015. 79 30
Gildfind, D.E. and Morgan, Richard G. (2015) A new sliding joint to accommodate recoil of a free-piston-driven expansion tube facility. Shock Waves Journal, 1-9. doi:10.1007/s00193-015-0609-9     0 1
Zhang, M., Reilly, K. and Kelly, P. M. (1999) A new surface - alloying technique for pure copper. Journal of Materials Research, 14 8: 3271-3274. doi:10.1557/JMR.1999.0442 98   2 0
Liu, Sheng, Gu, Yuantong and Huang, Han (2011) A new tip area function for instrumented nanoindentation at extremely small contact depths. Materials Science and Engineering A-Structural Materials Properties Microstructure and Processing, 528 27: 7948-7951. doi:10.1016/j.msea.2011.07.025 100   11 Cited 11 times in Scopus11 0
Fu, Z., Li, Y., Topal, E. and Williams, D. J. (2015). A new tool for optimisation of mine waste management in potential acid forming conditions. In: Farshad Rashidi Nejad, Tailings and Mine Waste Management for the 21st Century. Tailings and Mine Waste Management for the 21st Century, Sydney, Australia, (). 27-28 July 2015.    
Xing, Zheng, Chen, Zhi-Gang, Zong, Xu and Wang, Lianzhou (2014) A new type of carbon nitride-based polymer composite for enhanced photocatalytic hydrogen production. Chemical Communications, 50 51: 6762-6764. doi:10.1039/c4cc00397g 119   16 Cited 17 times in Scopus17 0
Han, P. D. and Zou, J. (1998) A new type of dissociated misfit dislocation in [001] ZnTe/GaAs strained-layer heterostructures. Applied Physics Letters, 72 19: 2424-2426. doi:10.1063/1.121374 63   4 Cited 4 times in Scopus4 0
Deulin, Evgenii A., Galakhar, Alexander S. and Basmanov, Mikhail S. (2009). A new type of wide-range vacuum sensor. In: Industrial Technology, 2009, ICIT 2009, IEEE International Conference on. IEEE International Conference on Industrial Technology, ICIT 2009, Churchill, VIC, (). 10 - 13 February 2009. doi:10.1109/ICIT.2009.4939520 18   0 0
Bermingham, M. J., Kent, D. and Dargusch, M. S. (2015) A new understanding of the wear processes during laser assisted milling 17-4 precipitation hardened stainless steel. Wear, 328-329 518-530. doi:10.1016/j.wear.2015.03.025 23   2 Cited 2 times in Scopus2 0
Qian, Ma, StJohn, D. H. and Frost, M. T. (2004). A new zirconium-rich master alloy for the grain refinement of magnesium alloys. In: K. U. Kainer, Magnesium: Proceedings of the 6th International Conference Magnesium Alloys and Their Applications. 6th International Conference Magnesium Alloys and Their Applications, Wolfsburg, (707-712). 18-20 November, 2003. doi:10.1002/3527603565.ch112 562   0
McIntyre, T. J., Eichmann, T. N., Lourel, I., Hajek, K. M. and Rubinsztein-Dunlop, H. (2005). An expansion tube study of high enthalpy carbon-dioxide flows. In: Shock waves : proceedings of the 24th International Symposium on Shock Waves. 24th International Symposium on Shock Waves, Beijing, Peoples Republic of China, (107-112). 11-16 July 2004. 68   0
Wang, S. Q., Huang, H.W., Shang, Z. T., Huang, H., Sheng, S. M. and HQ, M. (2005) An experimental investigation of effects of electrolytes on the formation of oxide films involved in ELID grinding. Precision Manufacturing and Automation, 164 4: 14-23. 63  
Shang, Z. T., Huang, H., Sheng, X. M. and Mi, H. Q. (2007) An experimental investigation of ELID high speed grinding technology for silicon nitride ceramics. Hunan Daxue Xuebao, 34 12: 30-34. 77  
Huang, H and Yin, L (2006) An experimental investigation of fabrication mechanisms of optic fibre end faces using nano/microindentation and nanogrinding. International Journal of Nanomanufacturing, 1 1: 47-61. 79  
Freebairn, G. S., Boyce, R. R. and Mudford, N. R. (2009). An experimental investigation of hypersonic transverse jet interactions in laminar, transitional and turbulent flows. In: Proceedings of the 6th European Symposium on Aerothermodynamics for Space Vehicles. The 6th European Symposium on Aerothermodynamics for Space Vehicles, Versailles, France, (). 3-6 November, 2008. 73   0
D'Souza, M. G., Eichmann, T. N., Potter, D. F., Mudford, N. R., Morgan, R. G. and McIntyre, T. J. (2010). An experimental investigation of radiation over an ablating stardust model at 9.8 KM/S. In: 61st International Astronautical Congress 2010 (IAC 2010). 61st International Astronautical Congress 2010, IAC 2010, Prague, (10981-10990). 27 September - 1 October 2010. 50   0
Xie, G. Z. and Huang, Han (2008) An experimental investigation of temperature in high speed deep grinding of partially stabilized zirconia. International Journal of Machine Tools & Manufacture, 48 14: 1562-1568. doi:10.1016/j.ijmachtools.2008.06.002 138   25 Cited 32 times in Scopus32 0
Huang, Han, Huang, Q., Zhu, X. H. and Hu, X. Z. (1993) An experimental investigation of the strength of individual brown corundum abrasive grains. Scripta Metallurgica et Materialia, 29 3: 299-304. doi:10.1016/0956-716X(93)90503-K 78   1 Cited 1 times in Scopus1 0
Azadi, Mohsen, Gheisari, Reza and Ansari, Mohammad Reza (2014) An experimental investigation on the effect of middle length and inclination angle of S-shaped channel on two-phase flow patterns. Experimental Thermal and Fluid Science, 58 36-47. doi:10.1016/j.expthermflusci.2014.06.019 38   1 Cited 1 times in Scopus1 0
Huang, Hui, Huang, Guoqin, Xu, Xipeng and Huang, Han (2013) An experimental study of machining characteristics and tool wear in the diamond wire sawing of granite. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 227 7: 943-953. doi:10.1177/0954405413478262 60   3 Cited 4 times in Scopus4 0
Rohde, A. and Veidt, M. (2008). An experimental study of plate wave diffraction tomography. In: Denier, J., Finn, M. and Mattner. T., XXII International Congress of Theoreetical and Applied Mechanics. ICTAM 2008, Adelaide, Australia, (1-2). 25-29 August 2008. 80  
Dehkhoda, Sevda and Hood, Michael (2013) An experimental study of surface and sub-surface damage in pulsed water-jet breakage of rocks. International Journal of Rock Mechanics and Mining Sciences, 63 138-147. doi:10.1016/j.ijrmms.2013.08.013 35   14 Cited 20 times in Scopus20 0
Aminossadati, S. M. and Mee, D. J. (2013) An experimental study on aerodynamic performance of turbine nozzle guide vanes with trailing-edge span-wise ejection. Journal of Turbomachinery, 135 3: 031002.1-031002.12. doi:10.1115/1.4006663 191 5 0 Cited 5 times in Scopus5 0
Nagasekhar, A.V., Yoon, S.C., Tick-Hon, Y. and Kim, H.S. (2009) An experimental verification of the finite element modelling of equal channel angular pressing. Computational Materials Science, 46 2: 347-351. doi:10.1016/j.commatsci.2009.03.018 110   31 Cited 31 times in Scopus31 0
Zhao, M.C., Schmutz, P., Brunner, S., Liu, M., Song, G.L. and Atrens, A. (2009) An exploratory study of the corrosion of Mg alloys during interrupted salt spray testing. Corrosion Science, 51 6: 1277-1292. doi:10.1016/j.corsci.2009.03.014 134   96 Cited 112 times in Scopus112 0
Qiu, D, Shen, YX and Zhang, WZ (2006) An extended invariant line analysis for fcc/bcc precipitation systems. Acta Materialia, 54 2: 339-347. doi:10.1016/j.actamat.2005.09.009 90   8 Cited 8 times in Scopus8 0
Song, G., Atrens, A. and St John, D. H. (2001). An hydrogen evolution method for the estimation of the corrosion rate of magnesium alloys. In: J N Hyrn, Magnesium Technology 2001. Magnesium Technology 2001, New Orleans, USA, (255-262). 11-15 Feb 2001. 1244   79 0
Sheehan, Gregory John, Wong, Fook-Sin, Hourn, Michael Matthew, Kodama, Manabu and Hughes, David (2000). Anhydrous magnesium chloride. 6,143,270. 129 5
Wang, Shiliang, He, Shiliang, Huang, Han, Zou, Jin, Auchterlonie, Graeme John, Hou, Lizhen and Huang, Baiyun (2013) An improved loop test for experimentally approaching the intrinsic strength of alumina nanoscale whiskers. Nanotechnology, 24 28: 285703.1-285703.7. doi:10.1088/0957-4484/24/28/285703 92   11 Cited 11 times in Scopus11 0
Aminossadati, Saiied, Bowen, Warwick, Sheridan, Eoin, Amanzadeh, Mohammad and Kizil, Mehmet (2013) An innovative fibre optic based methane sensor Brisbane, Australia: ACARP 153  
Raisi, A., Aminossadati, S. M. and Ghasemi, B. (2016) An innovative nanofluid-based cooling using separated natural and forced convection in low Reynolds flows. Journal of the Taiwan Institute of Chemical Engineers, 62 259-266. doi:10.1016/j.jtice.2016.02.014     0 0 0
Shi, ZM and Atrens, A (2011) An innovative specimen configuration for the study of Mg corrosion. Corrosion Science, 53 1: 226-246. doi:10.1016/j.corsci.2010.09.016 124   106 Cited 113 times in Scopus113 0
Shi, Zhiming and Atrens, Andrej (2011). An innovative specimen for Mg corrosion studies. In: Hajo Dieringa, Norbert Hort and Karl Ulrich Kainer, Light Metals Technology V: Selected, peer reviewed papers from the 5th International Conference on Light Metals Technology. 5th International Conference on Light Metals Technology, Luneburg, Germany, (365-368). 19-22 July 2011. doi:10.4028/www.scientific.net/MSF.690.365 96 70 2 Cited 2 times in Scopus2 0
Veeraragavan, A., Pesala, Balasubrahmanyam and Sujith, R. I. (2006). An integral approach to modeling sound propagation through a finite combustion zone. In: 44th AIAA Aerospace Sciences Meeting and Exhibit Online Proceedings (2006). 44th AIAA Aerospace Sciences Meeting and Exhibit, Reno, Nevada, United States, (). 9 – 12 January 2006. 53  
Yang, Quangang and Reidsema, Carl (2006) An integrated intelligent design advisor system in engineering design. Cybernetics and Systems, 37 6: 609-634. doi:10.1080/01969720600734644 101   1 Cited 6 times in Scopus6 0
Bolhar, Robert, Ring, Uwe, Kemp, Anthony I. S., Whitehouse, Martin J., Weaver, Steve D., Woodhead, Jon D., Uysal, I. Tonguc and Turnbull, Rose (2012) An integrated zircon geochronological and geochemical investigation into the Miocene plutonic evolution of the Cyclades, Aegean Sea, Greece: part 2-geochemistry. Contributions to Mineralogy and Petrology, 164 6: 915-933. doi:10.1007/s00410-012-0759-z 78   8 Cited 9 times in Scopus9 0
Pillai, Krishna M. and Hooman, Kamel (2013). An introduction to medeling flows in porous media. In Reza Masoodi and Krishna M. Pillai (Ed.), Wicking in porous materials: traditional and modern modeling approaches (pp. 55-96) Boca Raton, FL, United States: CRC Press. 43  
Pillai, Krishna M. and Hooman, Kamel (2013). An introduction to modeling flows in porous media. In Reza Masoodi and Krishna M. Pillai (Ed.), Wicking in porous materials: traditional and modern modeling approaches (pp. 55-96) Boca Raton, Florida: CRC Press. doi:10.1201/b12972-5 113 9 0
StJohn, D. H., Easton, M. A. and Qian, Ma (2009). An inverse growth restriction model for predicting solidified grain size. In: Steve L. Cockcroft and Daan M. Maijer, Modeling of Casting, Welding, and Advanced SolidificationProcesses-XII : Proceedings from the Twelfth International Conference on Modeling of Casting, Welding and Advanced Solidification Processes. 12th International Conference on Modeling of Casting, Welding and Advanced Solidification Processes, Vancouve, Canada, (477-484). 7-14 June 2009. 234   1 0
Dargusch, M. S., Hamasaiid, A. and Dour, G. (2008) An inverse model to determine the heat transfer coefficient and its evolution with time during solidification of light alloys. International Journal of Nonlinear Sciences and Numerical Simulation, 9 3: 275-282. doi:10.1515/IJNSNS.2008.9.3.275 93   3 0 0
Nehring, M. and Cheng, X. (2016) An investigation into the impact of mine closure and its associated cost on life of mine planning and resource recovery. Journal of Cleaner Production, 127 228-239. doi:10.1016/j.jclepro.2016.03.162     0 0 0
Rashid, R. A. Rahman, Sun, S., Wang, G. and Dargusch, M. S. (2012) An investigation of cutting forces and cutting temperatures during laser-assisted machining of the Ti-6Cr-5Mo-5V-4Al beta titanium alloy. International Journal of Machine Tools and Manufacture, 63 58-69. doi:10.1016/j.ijmachtools.2012.06.004 111   18 Cited 33 times in Scopus33 0
Sadafi, M. H., Jahn, I., Stilgoe, A. B. and Hooman, K. (2014). An investigation of evaporation from single saline water droplets: experimental and theoretical approaches. In: Harun Chowdhury and Firoz Alam, Proceedings of the 19th Australasian Fluid Mechanics Conference. 19th Australasian Fluid Mechanics Conference, Melbourne, VIC, Australia, (216.1-216.4). 8-11 December 2014. 36 3
Daniel, Bill (W. J. T.), Jones, Rhys, Mohan, Sajith, Pal, Sarvesh, Farjoo, Mohammadalli and Kerr, Malcolm (2011). An investigation of rail squats from several perspectives. In: 9th World Congress on Railway Research (WCRR 2011): Conference proceedings. 9th World Congress on Railway Research (WCRR 2011), Lille, France, (). 22 - 26 June 2011. 280 12
Huang, H, Dallimore, MP, Pan, J and McCormick, PG (1998) An investigation of the effect of powder on the impact characteristics between a ball and a plate using free falling experiments. Materials Science And Engineering A-structural Materials Properties Microstructure And Processing, 241 1-2: 38-47. doi:10.1016/S0921-5093(97)00470-X 104   26 0 0
Zhang, Yaowu, Kent, Damon, Wang, Gui, St John, David and Dargusch, Matthew (2015) An investigation of the mechanical behaviour of fine tubes fabricated from a Ti-25Nb-3Mo-3Zr-2Sn alloy. Materials and Design, 85 256-265. doi:10.1016/j.matdes.2015.06.127 68   1 Cited 2 times in Scopus2 0
Dong, Zhigang, Huang, Han and Kang, Renke (2010) An investigation of the onset of elastoplastic deformation during nanoindentation in MgO single crystal (001) and (110) planes. Materials Science And Engineering A Structural Materials Properties Microstructure And Processing, 527 16-17: 4177-4184. doi:10.1016/j.msea.2010.03.037 121   12 Cited 11 times in Scopus11 0
Lilley, Charles R. and Macrossan, Michael N. (2002) An investigation of the Sutherland molecular model for DSMC simulations. 9/2002, Department of Mechanical Engineering, The University of Queensland. 737 359
Sun, Haiqing and Shi, Yinong (2009) An investigation on Hall-Petch relationship in electrodeposited nanocrystalline Cu-Ni-P Alloys. 材料科学技术学报 (英文版) [Journal of Materials Science & Technology], 25 3: 347-350. 60   4 0

Page 8 of 107

Result Pages:    « first ‹ previous  1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17  next › last »