Julius Kruttschnitt Mineral Research Centre Publications

Browse Results (1413 results found)

Subscribe to the RSS feed for this result setSubscribe to the RSS feed for this result set

Page 7 of 29

Result Pages:    « first ‹ previous  1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16  next › last »

Refine

  Abstract Views File Downloads Thomson Reuters Web of Science Citation Count Scopus Citation Count Altmetric Score
Shi, Fengnian, Morrison, Rob, Cervellin, Andrew, Burns, Fraser and Musa, Fiesal (2009) Comparison of energy efficiency betweeen ball mills and stirred mills in coarse grinding. Minerals Engineering, 22 7-8: 673-680. doi:10.1016/j.mineng.2008.12.002 145   11 Cited 17 times in Scopus17 0
Xie, Weining, He, Yaqun, Luo, Cheng, Zhang, Xia, Li, Hong, Yu, Jiadong, Wang, Haifeng and Shi, Feng N. (2015) Comparison of float-sink and progressive release flotation of ground products of coal middlings.. Physiochemical Problems of Mineral Processing, 51 2: 675-684. doi:10.5277/ppmp150225 27   0 0 0
Sanwani, E., Zhu, Y., Franzidis, J. P., Manlapig, E. V. and Wu, J. (2006) Comparison of gas hold-up distribution measurement in a flotation cell using capturing and conductivity techniques. Minerals Engineering, 19 13: 1362-1372. doi:10.1016/j.mineng.2006.01.006 146   2 Cited 3 times in Scopus3 0
Shi, F. (2004) Comparison of grinding media - Cylpebs versus balls. Minerals Engineering, 17 11/12: 1259-1268. doi:10.1016/j.mineng.2004.05.019 644   10 Cited 17 times in Scopus17 0
He, Yaqun, Zuo, Weiran, Zhang, Shumin, Lao, Guohong and Duan, Chenlong (2008) Comparison of interpolations for coal nature of coalfield based on geological statistics. Meitan Xuebao (Journal of the China Coal Society), 33 5: 514-517. 30   0
Antonio, C. and Deam, R. T. (2005) Comparison of linear and non linear sweep rate regimes in variable frequency microwave technique for uniform heating in materials processing. Journal of Materials Processing Technology, 169 2: 234-241. doi:10.1016/j.jmatprotec.2005.03.024 74   11 Cited 11 times in Scopus11 0
Ballantyne, G. R., Shi, F., Bonfils, B. and Powell, M. S. (2014). Comparison of single particle, Bond and bed tests for fine particle ore breakage characterisation. In: Comminution '14: 9th International Comminution Symposium, Cape Town, South Africa, (). 7-10 April, 2014. 44  
Montes Atenas, Gonzalo, Mielczarski, Ela and Mielczarski, Jerzy A. (2005) Composition and structure of iron oxidation surface layers produced in weak acidic solutions. Journal of Colloid and Interface Science, 289 1: 157-170. doi:10.1016/j.jcis.2005.03.062 92   12 Cited 14 times in Scopus14 0
Bonfils, Benjamin, Julcour-Lebigue, Carine, Guyot, Francois, Bodenan, Francoise, Chiquet, Pierre and Bourgeois, Florent (2012) Comprehensive analysis of direct aqueous mineral carbonation using dissolution enhancing organic additives. International Journal of Greenhouse Gas Control, 9 334-346. doi:10.1016/j.ijggc.2012.05.009 70   18 Cited 20 times in Scopus20 0
Khanal, Manoj, Schubert, Wolfgang and Tomas, Jürgen (2008) Compression and impact loading experiments of high strength spherical composites. International Journal of Mineral Processing, 86 1-4: 104-113. doi:10.1016/j.minpro.2007.12.001 61   11 Cited 12 times in Scopus12 0
Brennan, M. S., Holtham, P. N., Lyman, G. J. and Rong, R. X. (2002). Computational fluid dynamic simulation of dense medium cyclones. In: Bruce Firth, Proceedings of the Ninth Australian Coal Peparation Conference. Ninth Australian Coal Preparation Conference, Yeppoon, QLD, (107-120). 13-17 Oct, 2002. 114  
Onederra, I. A., Riihioja, K. J., Paganini, G. and Roldan, M. (2001). Computer aided blast design and information management applied to open pit narrow vein mining at Cerro Vanguardia. In: Heping Xie, Yuehan Wang and Yaodong Jiang, Proceedings of the 29th International Symposium on Computer Applications in the Minerals Industry. APCOM 2001, Beijing China, (337-342). 25-27 April 2001. 220   0
Onederra, I. A., Riihioja, K. J. and Chitombo, G. P. (2001). Computer aided design and information management for tunnel development using drilling and blasting techniques. In: P Sarkka and P Eloranta, Proceedings of the ISRM Regional Symposium Eurock 2001 - Rock Mechanics, A Challenge for Society. ISRM Regional Symposium Eurock 2001, Espoo, Finland, (589-595). 4-7 June 2001. 135   0
Rayner, J. G. and Napier-Munn, Timothy J. (1997). Conceptual process models of the wet drum magnetic separator.. In: Dense Media '97. 6th Samancor Symposium on Dense Medium Separation, Broome, WA Australia, (1-12). 6-7 May 1997. 8  
Runge, K. C., Harris, C, Franzidis, J. and Manlapig, E. (2006). Conservation of floatability across processes in industrial flotation circuits. In: G.Onal, N.Acarkan and et.al., Proceedings of the XXIII International Mineral Processing Congress. XXIII IMPC, Istanbul, Turkey, (1909-1914). 3-8 September, 2006. 71  
McBride, Andrew, Govender, Indresan, Powell, Malcolm and Cloete, Trevor (2004) Contributions to the experimental validation of the discrete element method applied to tumbling mills. Engineering Computations, 21 2: 119-136. doi:10.1108/02644400410519703 60   14 Cited 16 times in Scopus16 0
Pax, R. A. and Gelling, D. (2001). Control of mineral sands dry plant. In: Proceedings of the International Heavy Minerals Conference - Advances in Mineral Beneficiation. International Heavy Minerals Conference, Fremantle, (127-129). 18-19 June 2001. 61  
Maleki-Moghaddam, M., Yahyaei, M. and Banisi, S. (2011). Converting AG to SAG mills: The Col-E-Gohar Iron Ore Company case. In: Ken Major, Brian C. Flintoff, Bern Klein and Kelly McLeod, Proceedings of an International Conference on Autogenous Grinding, Semiautogenous Grinding and High Pressure Grinding Roll Technology 2011. International Conference on Autogenous Grinding, Semiautogenous Grinding and High Pressure Grinding Roll Technology 2011, Vancouver, Canada, (). 25-28 September 2011. 102 4
Maleji-Moghaddam, M., Yahyaei, M. and Banisi, S. (2012) Converting AG to SAG mills: The Gol-E-Gohar Iron Ore Company case. Powder Technology, 217 100-106. doi:10.1016/j.powtec.2011.10.014 162   5 Cited 7 times in Scopus7 1
Morrison, R. D. (1999). Converting process data into performance information. In: Effective IT Planning in Mining and Exploration. Effective IT Planning in Mining and Exploration, Perth, WA, (1-11). 6-7 December 1999. 51  
Abbasi, Fatemeh, Sarabi, Ali Asghar and Farrokhpay, Saeed (2013). Corrosion resistance of phosphate conversion coating on AZ31 magnesium alloy. In: Chemeca 2013 : Challenging Tomorrow. Chemeca 2013: Australasian Conference on Chemical Engineering, Brisbane, QLD, Australia, (1-6). 29 September-2 October 2013. 83 12
Parbhakar-Fox, A., Lottermoser, B. and Bradshaw, D. J. (2013). Cost-effective means for identifying acid rock drainage risks: integration of the geochemistry-mineralogy-texture approach and geometallurgical techniques. In: Simon Dominy, Proceedings: The Second AusIMM International Geometallurgy Conference (GeoMet) 2013. GeoMet 2013: The Second AusIMM International Geometallurgy Conference, Brisbane, QLD, Australia, (143-154). 30 September-2 October, 2013. 47 7
McLellan, Benjamin C., Williams, Ross P., Lay, Janine, van Riessen, Arie and Corder, Glen D. (2011) Costs and carbon emissions for geopolymer pastes in comparison to ordinary portland cement. Journal of Cleaner Production, 19 9-10: 1080-1090. doi:10.1016/j.jclepro.2011.02.010 140   137 Cited 153 times in Scopus153 7
Napier-Munn, T. J. (2014). Cunning solutions to process improvement. In: 12th AusImm Mill Operators' Conference 2014: Proceedings. 12th AusIMM Mill Operators' Conference 2014, Townsville, Australia, (5-10). 1-3 September 2014. 40 5
Holtham, P. N., Rong, R. X., Subramanian, V., Sheridan, G. A., Cameron, P. M. and Gordon, H. (2002). Current DMS research at the JKMRC. In: The Eighth Samancor Symposium on Dense Media Separation. Dense Media 2002, Port Douglas, Australia, (). 1 Nov 2002. 83  
Schwarz, S. and Alexander, D. (2012). Current issues in the mining industry - from the operational mineral processor's perspective. In: Peter Hills (Conference Chair), Proceedings: 11th AusIMM Mill Operators' Conference 2012. 11th AusIMM Mill Operators' Conference 2012, Hobart, Tasmania, (369-372). 29-31 October 2012. 65 13
Palaniandy, Samayamutthirian, Azizli, Khairun Azizi Mohd, Hong, Ee Xun, Hashim, Syed Fuad Saiyid and Hussin, Hashim (2006) Custom made micronized silica for paint industry via fine grinding process. Advances in Technology of Materials and Materials Processing Journal, 8 1: 109-116. 42  
Morrison, Robert (2008). Data analysis for metal balancing. In R. D. Morrison (Ed.), An introduction to metal balancing and reconciliation (pp. 231-271) Indooroopilly, Qld, Australia: Julius Kruttschnitt Mineral Research Centre. 77  
Morrison, Robert (2008). Data analysis for reconciliation. In R. D. Morrison (Ed.), An introduction to metal balancing and reconciliation (pp. 273-305) Indooroopilly, Qld., Australia: Julius Kruttschnitt Mineral Research Centre. 57  
Xie, Weiguo, Bonis, Ioannis and Theodoropoulos, Constantinos (2015) Data-driven model reduction-based nonlinear MPC for large-scale distributed parameter systems. Journal of Process Control, 35 50-58. doi:10.1016/j.jprocont.2015.07.009 433   0 Cited 1 times in Scopus1 0
McFarlane, A., Kuhar, L., Turner, N., Botsis, N. M. and Ravi, S. (2011). Defining the properties of good agglomerates. In: International Conference Percolation Leaching: The Status Globally and in South Africa, Gauteng, South Afrca, (111-123). 7-9 November 2011. 66  
Onederra, I. (2007) Delay timing factor for empirical fragmentation models. Mining Technology, 116 4: 176-179. doi:10.1179/174328607X282181 222   0 0
Powell, Malcolm, Nirmal Weerasekara, Cole, S., LaRoche, R.D. and Favier, J. (2011) DEM modelling of linear evolution and its influence on grinding rate in ball mills. Minerals engineering, 24 3-4: 341-351. doi:10.1016/j.mineng.2010.12.012 169   18 Cited 26 times in Scopus26 0
Delaney, G. W., Morrison, R. D., Sinnott, M. D., Cummins, S. and Cleary, P. W. (2015) DEM modelling of non-spherical particle breakage and flow in an industrial scale cone crusher. Minerals Engineering, 74 112-122. doi:10.1016/j.mineng.2015.01.013 27   3 Cited 5 times in Scopus5 0
Cleary, P. W., Sinnott, M. D. and Morrison, R. D. (2008) DEM prediction of particle flows in grinding processes.. International Journal for Numerical Methods in Fluids, 58 3: 319-353. doi:10.1002/fld.1728 63   40 Cited 43 times in Scopus43 0
Khanal, Manoj and Morrison, Rob (2009) DEM simulation of abrasion of nonspherical particles in tumbling mill. Particulate Science and Technology, 27 1: 68-76. doi:10.1080/02726350802611853 124   2 Cited 2 times in Scopus2 0
Cleary, P. W., Morrison, R. D. and Morrell, S. (2001). DEM validation for a scale model SAG mill. In: D Barratt et al, Proceedings of an International Conference on Autogenous and semi-Autogenous Grinding Technology. SAG 2001, Vancouver BC, (191-206). 30 Sept - 3 Oct 2001. 68  
Holtham, P. N., Brennan, M. S. and Mangadoddy, N. (2008). Dense medium cyclone research at the Julius Kruttschnitt Mineral Research Centre. In: 10th International Dense Medium Symposium. , Kapama Game Reserve, RSA, (). 11-14 May 2008. 84  
Holtham, P. N. (2006) Dense medium cyclones for coal washing - a review. Transactions of the Indian Institute of Metals, 59 5: 521-533. 193   5 0
Lynch, A. J. and Napier-Munn, Timothy J. (1986) Dense medium separation research at the Julius Kruttschnitt Mineral Research Centre. Mineral Processing and Extractive Metallurgy, 95 221-225. 8   2 0
Lyman, G. J., Subramanian, V. and Holtham, P. N. (2002). Density distribution in dense medium cyclones using gamma tomography. In: Proceedings of the 14th International Coal Preparation Congress and Exhibition. XIV International Coal Preparation Congress and Exhibition, Johannesburg, South Africa, (163-168). 11-15 March 2002. 75  
Napier-Munn, Timothy J. (1985) Density inversion in dense medium cyclones. Transactions of the Institute of Mining and Metallurgy Section C Mineral Processing and Extractive Metallurgy, 94 96-98. 19   0
Zhou, J., Mermillod-Blondin, R. and Cousin, P. (2009). Deportment of gold and silver in the Pinos Altos composite and leach residues: Implications for recovery improvement. In: World Gold 2009 Conference. World Gold Conference 2009, Gauteng, South Africa, (75-83). 26-30 October 2009. 52  
Zanin, Massimiliano and Saeed, Farrokhpay (2011). Depression of pyrite in porphyry copper flotation. In: Willy Kracht, Romke Kuyvenhoven, Suzanne Lynch-Watson and Gonzalo Montes-Atenas, Proceedings of the 8th International Mineral Processing Seminar. Procemin 2011 - 8th International Mineral Processing Seminar, Santiago, Chile, (135-143). 30 November - 2 December 2011. 170 3
Khanal, M., Zheng, Ying, Chen, Z., Sullivan, P. and Zheng, Yaping (2008) Design and finite element analysis of a new custom made orthotropic post material for dental aplications. The Internet Journal of Dental Science, 6 1: 1-18. 55  
Chaston, I. R. M. and Napier-Munn, T. J. (1974) Design and operation of dense-medium cyclone plants for the recovery of diamonds in Africa.. Journal of the Southern African Institute of Mining and Metallurgy, 75 5: 120-133. 11  
Morrison, R. D. (2000). Design and optimisation of crushing and grinding circuits. In: 2nd Annual Crushing and Grinding in Mining Conference. , Jo'Burg RSA, (). 14-15 February 2000. 99  
Zuo, Weiran, He, Yaqun, He, Jingfeng and Zhang, Shumin (2007) Design and practice on coal quality prediction management information system of Fengfeng coal field. Meitan Kexue Jishu (Coal Science and Technology), 35 5: 65-68. 39  
Edraki, M., Huynh, T., Baumgartl, T., Huang, L., Andrusiewicz, M., Tungpalan, K., Tayebi-Khorami, M., Wightman, E., Palaniandy, S., Manlapig, E., Evans, C., Farrokhpay, S., Bradshaw, D. and Vink, S. (2014). Designer tailings – an integrated model for tailings management. In: Life-of-Mine 2014: Delivering sustainable legacies through integrated Life-of-Mine Planning. Life-of-Mine 2014, Brisbane, QLD, Australia, (599-607). 16-18 July 2014. 125 6
Edraki, Mansour, Huynh, Trang, Baumgartl, Thomas, Huang, Longbin, Andrusiewicz, Michal, Tungpalan, Kate, Tayebi-Khorami, Maedeh, Wightman, Elaine, Palaniandy, Sam, Manlapig, Emmanuel, Evans, Cathy, Farrokhpay, Saeed, Bradshaw, Dee and Vink, Sue (2014). Designer tailings: improving the management of tailings through collaborative research. In: H. Miller and L. Preuss, 8th AMD: Proceedings of the Eighth Australian Workshop on Acid and Metalliferous Drainage. AMD14: The Triennial 8th Australian Workshop on Acid and Metalliferous Drainage, Adelaide, SA, Australia, (173-182). 29 April–2 May, 2014. 121 9

Page 7 of 29

Result Pages:    « first ‹ previous  1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16  next › last »