Julius Kruttschnitt Mineral Research Centre Publications

Browse Results (1324 results found)

Subscribe to the RSS feed for this result setSubscribe to the RSS feed for this result set

Page 18 of 27

Result Pages:    « first ‹ previous  8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27  next › last »

  Abstract Views File Downloads Thomson Reuters Web of Science Citation Count Scopus Citation Count Altmetric Score
McFarlane, Angus, Jonas, Addai-Mensah, Bremmell, Kristen E. and Acarkan, N. (2006). Optimizing flocculation and dewatering of clay dispersions via flocculant chemistry, temperature and pulp shear. In: N. Acarkan and Guven Onal, Proceedings of the XXIII International Mineral Processing Congress. International Mineral Processing Congress 2006, Istanbul, Turkey, (). 3-8 September 2006. 45  
Addai-Mensah, Jonas, Quaicoe, Ishmael, Nosrati, Ataollah, Franks, George, Forbes, Liza, Liu, Lian, Robinson, Dave and Farrow, John (2011). Optimizing nickel laterite agglomeration for enhanced heap leaching. In: Proceedings of the ALTA 2011 Nickel Cobalt, Copper Conference. ALTA 2011 Nickel-Cobalt-Copper Conference, Perth Australia, (). 23-28 May 2011. 35  
Shi, Feng N. (2013). Ore breakage characterisation and its applications in the mining industry. In: Wang, Yun Min, 中国矿业科技文汇. 2013年第四届中国矿业科技大会, Nanjing, China, (1-6). 30 August-3 September, 2013. 9  
Miller, G. M. (2003). Ore geotechnical effects on copper heap leach kinetics. In: Hydrometallurgy 2003: proceedings of the 5th international symposium honoring Professor Ian M. Ritchie. Hydrometallurgy 2003: proceedings of the 5th international symposium honoring Professor Ian M. Ritchie, Canada, (329-342). 24-27 August 2003. 58  
Djordjevic, N. (2002) Origin of blast induced fines. Transactions of the Institution of Mining and Metallurgy Section A Mining Technology, 111 2: A143-A146. 49   2 Cited 5 times in Scopus5
Xu, H. and Morrison, R. D. (2007). P9 information management package: development and implementation. In: Magri, E. J., APCOM 2007 Proceedings of the 33rd International Symposium on the Application of Computers and Operations Research in the Minerals Industry. APCOM 2007, Santiago, Chile, (427-433). 24-27 April, 2007. 46  
He, Mingzhao, Wang, Yanmin and Forssberg, Eric (2006) Parameter effects on wet ultrafine grinding of limestone through slurry rheology in a stirred media mill. Powder Technology, 161 1: 10-21. doi:10.1016/j.powtec.2005.08.026 71   26 Cited 36 times in Scopus36 0
He, Mingzhao, Wang, Yanmin and Forseberg, Eric (2006) Parameter studies on the rheology of limestone slurries. International Journal of Mineral Processing, 78 2: 63-77. doi:10.1016/j.minpro.2005.07.006 155   17 Cited 22 times in Scopus22 0
Pirouzan, D., Yahyaei, M. and Banisi, S. (2014) Pareto based optimization of flotation cells configuration using an oriented genetic algorithm. International Journal of Mineral Processing, 126 107-116. doi:10.1016/j.minpro.2013.12.001 59   0 Cited 0 times in Scopus0 1
Pirouzan, D., Mohsen, Yahyaei and Banisi, S. (2012). Pareto based optimization of flotation cells configuration using oriented genetic algorithm. In: Pradip (Conference President), XXVI International Mineral Processing Congress - IMPC 2012: Conference Proceedings. XXVI International Mineral Processing Congress - IMPC 2012, New Delhi, India, (4239-4251). 24-28 September 2012. 58 5
Ziemski, M and Holtham, P. N. (2005) Particle bed charge decay behaviour under high tension roll separation. Minerals Engineering, 18 15: 1405-1411. doi:10.1016/j.mineng.2005.02.013 117   4 Cited 5 times in Scopus5 0
Cleary, P. W. and Morrison, R. D. (2009) Particle methods for modelling in mineral processing. International Journal of Computational Fluid Dynamics, 23 2: 137-146. doi:10.1080/10618560802680229 44   3 Cited 5 times in Scopus5 0
Runge, K. C., Tabosa, E. and Jankovic, A. (2013). Particle size distribution effects that should be considered when performing flotation geometallurgical testing. In: Simon Dominy, Proceedings: The Second AusIMM International Geometallurgy Conference (GeoMet) 2013. GeoMet 2013: The Second AusIMM International Geometallurgy Conference, Brisbane, QLD, Australia, (335-344). 30 September-2 October, 2013. 162 3
Bremhorst, K., Kear, G., Keating, A. J. and Huang, S. H. (2005) Patch and whole of surface mass-transfer rate measurements on a stepped rotating cylinder electrode. Corrosion, 61 10: 968-975. doi:10.5006/1.3280897 83   7 Cited 7 times in Scopus7 0
Jankovic, A. and Markovic, Z. (2002). Pebble milling option for reduced throughput. In: Zoran S. Markovic and Dragana T. Zivkovic, 34th International October Conference on Mining and Metallurgy: Proceedings. 34th International October Conference on Mining and Metallurgy, Bor Lake, Yugoslavia, (299-305). 30 September - 3 October 2002. 41  
Malysiak, V., O'Connor, C.T., Ralston, J., Gerson, A., Coetzer, L. P. and Bradshaw, D. J. (2002) Pentlandite-feldspar interaction and its effect on separation. International Journal of Mineral Processing, 66 1-4: 89-106. doi:10.1016/S0301-7516(02)00007-8 14   19 Cited 24 times in Scopus24 0
Peng, Y., Wang, B. and Bradshaw, D. (2011) Pentlandite oxidation in the flotation of a complex nickel ore in saline water. Minerals Engineering, 24 1: 85-87. doi:10.1016/j.mineng.2010.09.002 186   3 Cited 4 times in Scopus4 0
Buffler, A., Govender, I., Cilliers, J. J., Parker, D. J., Franzidis, J.-P., Mainza, A., Newman, R.T., Powell, M. and Van Der Westhuizen, A. (2010). PEPT Cape Town: A new positron emission particle tracking facility at iThemba LABS. In: Proceedings of International Topical Meeting on Nuclear Research Applications and Utilization of Accelerators. IAEA International Topical Meeting on Nuclear Research Applications and Utilization of Accelerators, Vienna, (). 4-8 May 2009. 32   Cited 1 times in Scopus1
Weerasekara, N. S. and Powell, M. S. (2013). Performance characterisation of AG/SAG mill pulp lifters using CFD techniques. In: Proceedings of Computational Modelling '13. Computational Modelling '13, Falmouth, Cornwall, U.K., (). 18-19 June, 2013. 28  
Weerasekara, N. S. and Powell, M. S. (2014) Performance characterisation of AG/SAG mill pulp lifters using CFD techniques. Minerals Engineering, 63 118-124. doi:10.1016/j.mineng.2014.02.001 92   0 Cited 0 times in Scopus0 0
Burdukova, Elizaveta, Li, Haihong, Bradshaw, Dee J. and Franks, George V. (2010). Poly (N-isopropylacrylamide) (PNIPAM) as a flotation collector: Effect of temperature and molecular weight. In: D. J. Bradshaw, J.-P. Franzidis and B. A. Wills, Minerals Engineering: Froth Flotation. Proceedings of: 4th International Flotation Conference. Flotation 09: 4th International Flotation Conference, Cape Town, WC, S.A., (921-927). 9-12 November 2009. doi:10.1016/j.mineng.2010.03.003 94   5 Cited 6 times in Scopus6 0
McPolin, D., Basheer, M., Long, A. E., Grattan, K. T .V., Sun, T. and Xie, W. (2006). Pore fluid analysis of cement mortar exposed to a chloride environment. In: M. Alexander, H.-D. Beushausen, F. Dehn and P. Moyo, Concrete repair, rehabilitation and retrofitting : Proceedings of the International Conference on Concrete Repair, Rehabilitation and Retrofitting (ICCRRR). 1st International Conference on Concrete Repair, Rehabilitation and Retrofitting (ICCRRR 2005), Cape Town, South Africa, (153-158). 21-23 November, 2005. 26  
Govender, I, Powell, M S, Chandramohan, R, Parker, D J, Fan, X and Ingram, A (2007). Positron emission particle tracking of charge particles in a scaled industrial tumbling mill. In: Proceedings of Discrete Elements Methods 07, Brisbane, (). Aug 27-29, 2007. 70  
Vanegas, Carlos and Holtham, Peter N. (2010). Possibilities for flotation acoustics monitoring - A review. In: XXV International Mineral Processing Congress - IMPC 2010 'Smarter processing for the future. International Mineral Processing Congress 2010, Brisbane, Qld, Australia, (2457-2470). 6-10 September, 2010. 274 1
Chen, Z. Q., Yamamoto, S., Maekawa, M., Kawasuso, A., Yuan, X. L. and Sekiguchi, T. (2003) Postgrowth annealing of defects in ZnO studied by positron annihilation, x-ray diffraction, Rutherford backscattering, cathodoluminescence, and Hall measurements. Journal of Applied Physics, 94 8: 4807-4812. doi:10.1063/1.1609050 107   117 Cited 120 times in Scopus120 0
Tungpalan, Djoan and Mendoza, H. (2011). Potential of dissolved air flotation (DAF) for removal of suspended nickel laterite particles. In: Proceedings of the 3rd AUN/SEED-NET Regional Conference on Global Environment. Regional Conference on Global Environment (3rd, AUN/SEED-NET, 2011), Kuala Lumpur, Malaysia, (). 21-22 February 2011. 33  
Bbosa, L. S., Govender, I., Mainza, A. N. and Powell, M. S. (2011) Power draw estimations in experimental tumbling mills using PEPT. Minerals Engineering, 24 3-4: 319-324. doi:10.1016/j.mineng.2010.10.005 69   6 Cited 9 times in Scopus9 0
Andersen, J. S. and Napier-Munn, Timothy J. (1988). Power prediction for cone crushers. In: 3rd Mill Operators' Conference, Cobar, NSW, (103-106). May. 3  
Djordjevic, N. (2001) Practical application of detonation code for explosive selection. The AusIMM Proceedings, 306 1: 23-26. 56  
Shaffer, M., Gu, Y. and Rohde, M. (2008). Practical applications for the silicon drift X-ray detector in SEM-platformed image analysis: The Bruker-MLA in practice. In: SME Annual Meeting 2007 and CMA 109th National Western Conference 2007 The Power of Mining: Energy's Influence, Denver, Co, U.S.A., (). 25-28 February, 2007. 57  
Powell, Malcolm, Foggiatto, Bianca and Hilden, Marko (2014). Practical simulation of FlexiCircuit processing options. In: Juan Yianatos, XXVIl International Mineral Processing Congress - IMPC 2014: Conference Proceedings. XXVII International Mineral Processing Congress - IMPC 2014, Santiago, Chile, (219-228). 20-24 October 2014. 34 7
Chen, Xumeng, Lu, Xuemin, Cui, Kun, Cui, Wei, Wu, Jun and Lu, Qinghua (2011) Precipitation supramolecular complex for photoinduced anisotropic material with dual mesogenic units. Polymer, 52 14: 3243-3250. doi:10.1016/j.polymer.2011.02.023 66   4 Cited 4 times in Scopus4 0
Delaney, G. W., Cleary, P. W., Morrison, R. D., Cummins, S. and Loveday, B. (2013) Predicting breakage and the evolution of rock size and shape distributions in AG and SAG mills using DEM. Minerals Engineering, 50-51 132-139. doi:10.1016/j.mineng.2013.01.007 40   2 Cited 1 times in Scopus1 0
Cleary, P. W. and Morrison, R. D. (2014). Predicting charge motion, slurry flow and rock breakage within and discharge from a 3D pilot SAG mill using a coupled DEM-SPH model. In: Comminution '14: 9th International Comminution Symposium, Cape Town, South Africa, (). 7-10 April, 2014. 30  
Wightman, Elaine M., Evans, Catherine L., Bradshaw, Dee J. and Manlapig, Emmanuel (2010). Predicting flotation response from liberation information. In: XXV International Mineral Processing Congress - IMPC 2010 'Smarter processing for the future. International Mineral Processing Congress 2010, Brisbane, Qld, Australia, (3403-3409). 6-10 September, 2010. 314 7 Cited 1 times in Scopus1
Cleary, P. W. and Morrison, R. D. (2011). Predicting patterns of slurry flow within and discharge from a 3D pilot SAG mill. In: Major, K., Flintoff, B.C., Klein, B. and McLeod, K., SAG 2011. International Autogenous Grinding, Semiautogenous Grinding and High Pressure Grinding Rolls Technology 2011, Vancouver BC, Canada, (1-22). 25-28 September, 2011. 40  
Newcombe, Bianca (2014) Predicting plant scale flash flotation performance: validation of laboratory methodology and applications for use. Minerals Engineering, 57 57-67. doi:10.1016/j.mineng.2013.12.013 40   0 Cited 1 times in Scopus1 0
Morrison, Robert D., Cleary, P. W., Loveday, B., Delaney, G. W. and Cummins, S. (2011). Predicting the evolution of rock size and shape distributions using DEM based on different modes of breakage in AG and SAG mills. In: Major, K., Flintoff, B.C., Klein, B. and McLeod, K., SAG 2011. International Autogenous Grinding, Semiautogenous Grinding and High Pressure Grinding Rolls Technology 2011, Vancouver, BC, Canada, (1-14). 25-28 September, 2011. 48  
Morrison, R. D., Powell, M., Cleary, P. W., Delaney, G. W., Cummins, S. and Loveday, B. (2014). Predicting the evolution of rock size distribution, throughput and product size in AG and SAG mills by incremental damage, chipping, rounding and abrasion. In: Comminution '14: 9th International Comminution Symposium, Cape Town, South Africa, (). 7-10 April, 2014. 98  
Cleary, Paul W. and Morrison, Rob D. (2012) Prediction of 3D slurry flow within the grinding chamber and discharge from a pilot scale SAG mill. Minerals Engineering, 39 184-195. doi:10.1016/j.mineng.2012.05.019 66   8 Cited 9 times in Scopus9 0
Spencer, S. J., Sharp, V., Campbell, J., Holmes, R. J., Towlands, T. G., Barker, D. G., Davey, K. J. and Phillips, P. L. (2006). Prediction of AG/SAG mill variables from surface vibrations. In: G. Onal and A. Acarkan, Proceedings of the XXIII International Mineral Processing Congress. XXIII International Mineral Processing Congress (IMPC 2006), Istanbul, Turkey, (44-49). 3-8 September 2006. 26  
Donskoi, E., Suthers, S. P., Campbell, J., Raynlyn, T. D. and Clout, J. M. F. (2005). Prediction of hydrocyclone performance in iron ore beneficiation using texture classification. In: Guven Onal and Neset Acarkan, Proceedings of the XXIII International Mineral Processing Congress (IMPC 2006). XXIII International Mineral Processing Congress (IMPC 2006), Istanbul, Turkey, (1897-1902). 3-8 September 2006. 40  
Narasimha, M., Brennan, M. S. and Holtham, P. N. (2007) Prediction of magnetite segregation in dense medium cyclone using computational fluid dynamics technique. International Journal of Mineral Processing, 82 1: 41-56. doi:10.1016/j.minpro.2006.09.013 183   3 Cited 5 times in Scopus5 0
Newcombe, Bianca, Wightman, Elaine M. and Bradshaw, Dee J. (2011). Prediction of plant flash flotation performance using conventional laboratory methods. In: Flotation'11, Cape Town, South Africa, (1-22). 14-17 November 2011. 64  
Whiten, W. J. and Tsoularis, T. (2005). Prediction of power generation from a wind farm. In: Graeme Wake, Proceedings of the 2004 Mathematics-In-Industry Study Group. MISG 2004, University of Auckland, New Zealand, (61-88). 26-30 January, 2004. 48  
Cleary, Paul W., Sinnott, Matt and Morrison, Rob (2006) Prediction of slurry transport in SAG mills using SPH fluid flow in a dynamic DEM based porous media. Minerals Engineering, 19 15: 1517-1527. doi:10.1016/j.mineng.2006.08.018 118   30 Cited 33 times in Scopus33 0
Napier-Munn, T. J., Scott, I. A., Tuteja, R., Davis, J. J. and Kojovic, T. (1992). Prediction of underflow medium density in dense medium cyclones. In: L. Svarovsky and M. T. Thew, Hydrocyclones: Analysis and Applications. Proceedings. 4th International Conference on Hydrocyclones, Southampton, UK, (191-214). 23-25 September, 1992. doi:10.1007/978-94-015-7981-0_13 6   0
McPolin, Daniel, Basheer, Muhammed P. A., Grattan, Kenneth T. V., Long, Adrian E., Sun, Tong and Xie, Weiguo (2011) Preliminary development and evaluation of fibre-optic chemical sensors. Journal of Materials in Civil Engineering, 23 8: 1200-1210. doi:10.1061/(ASCE)MT.1943-5533.0000290 70 3 0 Cited 0 times in Scopus0 0
Arbain, Roshaida, Othman, Munirah and Palaniandy, Samayamutthirian (2011) Preparation of iron oxide nanoparticle by mechanical milling. Minerals Engineering, 24 1: 1-9. doi:10.1016/j.mineng.2010.08.025 89   17 Cited 20 times in Scopus20 0
Burdukova, E., Becker, M., Bradshaw, D. J. and Laskowski, J. S. (2007) Presence of negative charge on the basal planes of New York talc. Journal of Colloid and Interface Science, 315 1: 337-342. doi:10.1016/j.jcis.2007.06.067 59   25 Cited 27 times in Scopus27 0

Page 18 of 27

Result Pages:    « first ‹ previous  8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27  next › last »