| |
|
|
|
|
|
Ziemski, Marcin (2003). Modelling HTR separation PhD Thesis, School of Engineering, Julius Kruttschnitt Mineral Resource Centre, The University of Queensland.
|
114 |
3 |
|
|
|
Evans, C. L. and Wightman, E.M. (2009). Modelling liberation of comminuted particles. Preprint 09-088.. In: , SME Annual Meeting. SME Annual Meeting, Denver, Colorado, (1-3). Feb 22-25, 2009.
|
35 |
|
|
|
|
Delaney, Gary W., Cleary, Paul W., Sinnott, Matt D. and Morrison, Rob D. (2010). Modelling non spherical particle breakage in DEM simulations. In: Antonio Munjiza, Discrete Element Methods - Simulation and discontinua: Theory and applications. DEM5: The Fifth International Conference on Discrete Element Methods, University of London, (354-359). 25-26 August, 2010.
|
51 |
1 |
|
|
|
Zheng, X, Franzidis, JP, Johnson, NW and Manlapig, E (2005) Modelling of entrainment in industrial flotation cells: the effect of solids suspension. Minerals Engineering, 18 1: 51-58.
|
121 |
|
16
|
Cited 19 times in Scopus19
|
|
Zheng, X., Johnson, N. W. and Franzidis, J.-P. (2006) Modelling of entrainment in industrial flotation cells: Water recovery and degree of entrainment. Minerals Engineering, 19 11: 1191-1203.
|
54 |
|
21
|
Cited 22 times in Scopus22
|
|
Zheng, X., Franzidis, J., Johnson, N.W. and Manlapig, E. (2005). Modelling of froth transportation in an Outokumpu 3m3 tank cell. In: Graeme J. Johnson, Conference Proceedings: Centenary of Flotation Symposium. Centenary of Flotation Symposium, Brisbane, Qld, (385-393). 6-9 June 2005.
|
109 |
|
|
|
|
Xiaofeng Zheng (2009). Modelling of Froth Transportation in Industrial Flotation Cells PhD Thesis, Julius Kruttschnitt Mineral Research Centre, The University of Queensland.
|
407 |
52 |
|
|
|
Zheng, X., Franzidis, J. P. and Manlapig, E. (2004) Modelling of froth transportation in industrial flotation cells: Part I. Development of froth transportation models for attached particles. Minerals Engineering, 17 9-10: 981-988.
|
132 |
|
12
|
Cited 18 times in Scopus18
|
|
Morrison, R. D., Shi, F. N. and Whyte, R. (2007) Modelling of incremental rock breakage by impact: For use in DEM models. Minerals Engineering, 20 3: 303-309.
|
81 |
|
13
|
Cited 16 times in Scopus16
|
|
Shi, F. and Kojovic, T. (2008). Modelling of particle size effect on breakage and its application in AG/SAG simulations. In: Comminution 2008 Conference, Falmouth, UK, (). 17-20 June 2008.
|
21 |
|
|
|
|
Gorain, B. K., Franzidis, J., Ward, K., Johnson, N. W. and Manlapig, E. (2000) Modelling of the Mt Isa rougher-scavenger copper flotation circuit using size-by-liberation data. Minerals and Metallurgical Processing, 17 3: 173-180.
|
312 |
|
4
|
|
|
Stoll, D., Dunne, R. and Holtham, P. (2012). Modelling the impact of flash flotation from batch cell flotation tests using Limn. In: Peter Hill (Conference Chair), Proceedings: 11th AusIMM Mill Operators' Conference 2012. 11th AusIMM Mill Operators' Conference 2012, Hobart, Tasmania, (179-183). 29-31 October 2012.
|
42 |
5 |
|
|
|
Esen, S., Onederra, I. and Bilgin, H.A. (2003) Modelling the size of the crushed zone around a blasthole. International Journal of Rock Mechanics And Mining Sciences, 40 4: 485-495.
|
50 |
|
8
|
Cited 24 times in Scopus24
|
|
Weber, R.O., Nelson, M.I. and Gay, S. L. (2002). Modelling wine production. In: Mike Pemberton and Ian Turner and Peter Jacobs, Proceedings - The Fifth Biennial Engineering Mathematics and Applications Conference. EMAC 2002, Brisbane, Australia, (237-240). 29 Sept - 2 Oct 2002.
|
60 |
|
|
|
|
Fandrich, Rolf., Gu, Ying., Burrows, Debra. and Moeller, Kurt. (2007) Modern SEM based mineral liberation analysis. International Journal of Mineral Processing, 84 1-4: 310-320.
|
181 |
|
36
|
Cited 41 times in Scopus41
|
|
Yahyaei, M., Hadizadeh, M. and Banisi, S. (2008). Modification of a SAG mill liner shape based on 3-D liner wear profile measurement at Sarcheshmeh copper mine. In: Dianzuo Wang, Proceedings of XXIV International Mineral Processing Congress. XXIV International Mineral Processing Congress, Beijing, China, (472-480). 24-28 September 2008.
|
17 |
|
|
|
|
Yahyaei, M., Banisi, S. and Hadizadeh, M. (2009) Modification of SAG mill liner shape based on 3-D liner wear profile measurements. International Journal of Mineral Processing, 91 3-4: 111-115.
|
47 |
|
2
|
Cited 3 times in Scopus3
|
|
Runge, K. C., Manlapig, E. and Franzidis, J. (2001). Monte Carlo analysis of the floatibility component approach used for flotation modelling. In: Adao Benvindo da Luz et al, VI Southern Hemisphere Meeting on Mineral Technology; XVIII Brazilian Meeting on Mineral Dressing and Extractive Metallurgy - Proceedings. VI Southern Hemisphere Meeting on Mineral Technology, Rio de Janeiro, (153-159). 27 May - 1 June 2001.
|
37 |
|
|
|
|
Shafiee, Shahriar (2010) More than a few good reasons to invest down under. MINING.com Magazine, 3 2: .
|
14 |
|
|
|
|
Liu, Huihua, Chaudhary, Deeptangshu, John, Joseph and Tade, Moses O. (2011) Morphological investigation into starch bionanocomposites via synchrotron radiation and differential scanning calorimetric. Journal of Nanotechnology, 2011 : 924582.1-924582.14.
|
11 |
|
|
0
|
|
Morrison, Robert (2008). Motivation for and benefits of accurate metal accounting. In R. D. Morrison (Ed.), An introduction to metal balancing and reconciliation (pp. 3-23) Indooroopilly, Qld., Australia: Julius Kruttschnitt Mineral Research Centre.
|
42 |
|
|
|
|
Bueno, Marcos, Kojovic, Toni, Powell, Malcolm and Shi, Feng N. (2012) Multi-component AG/SAG mill model. Minerals Engineering, In Press, Corrected Proof : 12-21.
|
43 |
|
|
|
|
Bueno, Marcos, Niva, Erik, Henriksson, Marcus, Philips, Doug, Powell, Malcolm, Kojovic, Toni, Shi, Feng N., Durant, Braam and Plint, Neville (2011). Multi-component autogenous pilot trials. In: Major, K., Flintoff, B.C., Klein, B. and McLeod, K., SAG 2011. International Autogenous Grinding, Semiautogenous Grinding and High Pressure Grinding Rolls Technology 2011, Vancouver BC, Canada, (1-17). 25-28 September, 2011.
|
37 |
|
|
|
|
Narasimha, M., Mainza, A. N. and Holtham, Peter N. (2012). Multi-component modelling concept for hydrocyclone classifier. In: Pradip (Conference President), XXVI International Mineral Processing Congress - IMPC 2012: Conference Proceedings. XXVI International Mineral Processing Congress - IMPC 2012, New Delhi, India, (3696-3707). 24-28 September 2012.
|
47 |
5 |
|
|
|
Shi, Fengnian, Mainza, A.N., Larbi-Bram, Stephen, Manlapig, Emmy and Ross, Victor (2011). Multicomponent ore breakage characterisation for Lonmin RoM mill troubleshooting. In: Major, K., Flintoff, B.C., Klein, B. and McLeod, K., SAG 2011. International Autogenous Grinding, Semiautogenous Grinding and High Pressure Grinding Rolls Technology 2011, Vancouver BC, Canada, (1-13). 25-28 September, 2011.
|
35 |
|
|
|
|
Chan, K., Bao, J. and Whiten, W. J. (2003). Multi-loop digital PI control design on the basis of the passivity theorem. In: Q. D. Nguyen and P. J. Ashman et. al., Chemeca 2003 - The 31st Australasian Engineering Conference - Products and Processes for the 21st Century. Chemeca 2003, Adelaide, SA, (1-8). 28 Sept - 1 Oct, 2003.
|
45 |
|
|
|
|
Brennan, M. S. (2003). Multiphase CFD simulations of dense medium and classifying hydrocyclones. In: , 3rd International Conference on CFD in the Minerals and Process Industries. CFD in Minerals and Process Industries, Melbourne, VIC, (59-63). 10-12 Dec, 2003.
|
50 |
|
|
|
|
Brennan, Matthew S., Narasimha, Mangadoddy and Holtham, Peter N. (2007) Multiphase modelling of hydrocyclones: prediction of cut-size. Minerals Engineering, 20 4: 395-406.
|
165 |
|
18
|
Cited 26 times in Scopus26
|
|
Narasimha, M., Brennan, M. S. and Holtham, P. N. (2010). Multi-phase modelling of hydrocyclone: Validation of particle size distributions against sampling probe data. In: , Proceedings of the XI International Seminar on Mineral Processing Technology (MPT-2010). XIth International Seminar on Mineral Processing Technology (MPT-2010), Jamshedpur, Jharkhand, India, (364-372). 15-17 December, 2010.
|
51 |
|
|
|
|
Brennan, M. S., Narasimha M., Rong, R. X., Holtham, P. N. and Manlapig, E. (2007). Multi-phase modelling of novel JK classifying cyclone: Assessment of performance characteristics. In: Lima, R. M. F., Ladeira, A. C. Q. and Da Silva, C. A. et.al., Proceedings of the VII Meeting of the Southern Hemisphere on Mineral Technology. VII Meeting of the Southern Hemisphere on Mineral Technology, Ouro Preto, Brazil, (569-576). 20-24 November, 2007.
|
58 |
|
|
|
|
Hilden, M. and Powell, M. (2008). Multiple-pass high pressure grinding rolls circuits. In: CSRP'08 delivering sustainable solutions to the minerals and metals industries, Brisbane, QLD, (). 18-19 November, 2008.
|
52 |
|
|
|
|
George Leigh (2009). Multi-scale image analysis for process mineralogy PhD Thesis, Julius Kruttschnitt Mineral Research Centre, The University of Queensland.
|
405 |
23 |
|
|
|
Niitsuma, Jun-ichi, Yuan, Xiao-li, Koizumi, Satoshi and Sekiguchi, Takashi (2006) Nanoprocessing of diamond using a variable pressure scanning electron microscope. Japanese Journal of Applied Physics, Part 2: Letters, 45 1-3: L71-L73.
|
30 |
|
3
|
Cited 3 times in Scopus3
|
|
Farrokhpay, Saeed (2011). New developments in paint and coatings technology. In Stephanie M. Sarrica (Ed.), Paints: Types, components, and applications (pp. 141-149) New York: Nova Science Publishers Inc.
|
41 |
2 |
|
|
|
Walters, S., Large, R. R. and Adair, B. J. I. (2007). New integrated geometallurgical research initiatives and implications for the future of economic geology. In: Mineral Exploration and Research: Digging Deeper 9th Biennial SGA Meeting, Dublin, Ireland, (). 20-23 August, 2007.
|
57 |
|
|
|
|
Walters, S. (2009). New research initiatives in geometallurgical integration: Moving towards a common operating language.. In: Dominy, S., Seventh International Mining Geology Conference- Proceedings. Seventh International Mining Geology Conference, Perth, WA, (19-22). 17-19 August, 2009.
|
26 |
|
|
|
|
Chen, Z. Q., Sekiguchi, T., Yuan, X. L., Maekawa, M. and Kawasuso, A. (2004) N+ ion-implantation-induced defects in ZnO studied with a slow positron beam. Journal of Physics: Condensed Matter, 16 2: S293-S299.
|
37 |
|
14
|
Cited 17 times in Scopus17
|
|
Pax, R. A. (2001). Non contact acoustic measurement in mill variables of SAG mills. In: D Barratt et al, Proceedings of an International Conference on Autogenous and semi-Autogenous Grinding Technology. SAG 2001, Vancouver BC, (386-391). 30 Sept - 3 Oct 2001.
|
92 |
|
|
|
|
Pax, R. A., Djordjevic, N. and Hocking, R. J. (2003). Non contact acoustics measurement and validation of SAG mill operation. In: L. Lorenzen and D. J. Bradshaw, Proceedings of the XXII International Mineral Processing Congress. IMPC 2003, Cape Town, South Africa, (371-377). 29 Sept - 3 Oct, 2003.
|
72 |
|
|
|
|
Meek, J. L. and Wang, Yicai (1998) Nonlinear static and dynamic analysis of shell structures with finite rotation. Computer Methods in Applied Mechanics and Engineering, 162 1-4: 301-315.
|
103 |
|
5
|
|
|
Sun, T., Yeo, T.L., Xie, W. G., Zhao, W. Z., Grattan, K. T. V., Basheer, M., Long, A. E. and McPolin, D. (2006). Novel fibre optic sensors for monitoring corrosion-related properties of concrete. In: M. C. Forde, Proceedings of the Eleventh International Conference on Extending the Life of Bridges Concrete and Composites Buildings, Masonry and Civil Structures. Structural Faults and Repair - 2006, Edinburgh, Scotland, (1-6). 13-15 June 2005.
|
21 |
|
|
|
|
Basheer, P. A. M., Grattan, K. T. V., McCarter, W. J., Sun, T., Long, A. E., McPolin, D. and Weiguo Xie (2005). Novel methods for in situ monitoring and testing of durability of concrete structures. In: Duran-Herrera, A. Raymundo Rivera International Symposium on Durability of Concrete, Monterrey, Mexico, (237-259). May 2005.
|
28 |
|
|
|
|
Mangadoddy, Narasimha, Brennan, M. S., Holtham, P. N. and Banerjee, P. K. (2007). Numerical Analysis of the Changes in Dense Medium Feed Solids on Dense Medium Cyclone Performance. In: Peter Jacobs, Tim McIntyre, Matthew Cleary, David Buttsworth, David Mee, Rose Clements, Richard Morgan and Charles Lemckert, 16th Australasian Fluid Mechanics Conference (AFMC). 16th Australasian Fluid Mechanics Conference (AFMC), Gold Coast, Queensland, Australia, (1042-1049). 3-7 December, 2007.
|
150 |
1105 |
|
|
|
Khanal, Manoj and Morrison, Rob (2012). Numerical simulation of abrasion of particles. In Marcin Adamiak (Ed.), Abrasion resistance of materials (pp. 53-74) Rijeka, Croatia: InTech Open.
|
18 |
|
|
|
|
Narasimha, M, Brennan, MS and Holtham, PN (2006) Numerical simulation of magnetite segregation in a dense medium cyclone. Minerals Engineering, 19 10: 1034-1047.
|
100 |
|
16
|
Cited 21 times in Scopus21
|
|
Gay, Stephen L. (1999) Numerical verification of a non-preferential-breakage liberation model. International Journal of Mineral Processing, 57 2: 125-134.
|
34 |
|
2
|
Cited 6 times in Scopus6
|
|
Xie, Weiguo, Bonis, Ioannis and Theodoropoulos, Constantinos (2011) Off-line model reduction for on-line linear MPC of nonlinear large-scale distributed systems. Computers and Chemical Engineering, 35 5: 750-757.
|
37 |
|
3
|
Cited 7 times in Scopus7
|
|
Holtham, PN and Nguyen, KK (2002) On-line analysis of froth surface in coal and mineral flotation using JKFrothCam. International Journal of Mineral Processing, 64 2-3: 163-180.
|
106 |
|
25
|
Cited 28 times in Scopus28
|
|
Schroder, A. J. and Holtham, P. N. (2004). On line dynamic simulation of grinding circuits using JKDynaGrind. In: , 5th Annual Crushing and Grinding 2004. 5th annual Crushing and Grinding 2004, Jupiters, Townsville, QLD, (). 29-30 March, 2004.
|
122 |
|
|
|
|
Vanegas Alvarez, C. and Holtham, P. N. (2008) On-line froth acoustic emission measurements in industrial sites. Minerals Engineering, 21 12-14: 883-888.
|
38 |
|
5
|
Cited 5 times in Scopus5
|
