| |
|
|
|
|
|
Savassi, O., Rahal, K., Johnson, N. W. and Franzidis, J. (1999) Mass transfer across the pulp-froth interface in industrial flotation cells Part 3: Bubble load analyser for measurement of the mass transfer of attached particles. Transactions of the Institution of Mining and Metallurgy. Section C Mineral processing and Extractive Metallurgy, 108 May-Aug 1999: 104-109.
|
35 |
|
|
|
|
Savassi, O., Rahal, K., Johnson, N. W. and Franzidis, J. (1999) Mass transfer across the pulp-froth interface in industrial flotation cells - Part 2: Entrainment analyser for measurement of the mass transfer of suspended particles. Transactions of the Institution of Mining and Metallurgy. Section C Mineral Processing and Extractive Metallurgy, 108 May-Aug 1999: 102-104.
|
37 |
|
|
|
|
Savassi, O., Rahal, K., Johnson, N. W. and Franzidis, J. (1999) Mass transfer across the pulp-froth interface in industrial flotation cells - Part 1: Jg probe for measurement of the air flow rate. Transactions of the Institution of Mining and Metallurgy. Section C Mineral Processing and Extractive Metallurgy, 108 May- August, 1999: 99-102.
|
30 |
|
|
|
|
Hashim, S. F. and Morrison, R. D. (2004) Mathematical modelling. World Cement, 35 9: 75-78.
|
15 |
|
|
0
|
|
Weerasekara, N. S., Frutos, F. J. Garcia, Carac, J. and Lockwood, F. C. (2008) Mathematical modelling of demineralisation of high sulphur coal by bioleaching. Minerals Engineering, 21 3: 234-240.
|
43 |
|
2
|
Cited 2 times in Scopus2
|
|
Rayner, J. G. and Napier-Munn, T. J. (2000). Mathematical models of the wet drum magnetic separator. In: , Dense Media 2000 - 7th Samancor Symposium on Dense Media Separation. , Kwa Zulu, Natal, RSA, (97-117). 30 Jan 2000.
|
87 |
|
|
|
|
Lam, M., Jankovic, A., Valery, W. and Kanchibotla, S. (2001). Maximising SAG mill throughput at Porgera gold mine by optimising blast fragmentation. In: D Barratt et al, Proceedings of an International Conference on Autogenous and semi-Autogenous Grinding Technology. SAG 2001, Vancouver BC, (271-288). 30 Sept - 3 Oct 2001.
|
49 |
|
|
|
|
Pritchard, G., Sweatman, W. L., Nan, K., Camden, M. and Whiten, W. J. (2008). Maximising the contribution of wind power in an electric power grid. In: Marchant, Prof. T., Edwards, Dr. M. and Mercer, Dr. G., Proceedings of the 2007 Mathematics and Statistics in Industry Study Group. MISG 2007, University of Wollongong, Wollongong, (114-139). 5-9 February, 2007.
|
46 |
|
|
|
|
Morrison, R. D. and Scott, A. (2002). Maximising the value of a wealth of information. In: , Value Tracking Symposium. Value Tracking Symposium, Brisbane, Australia, (191-197). 7-8 October, 2002.
|
15 |
|
|
|
|
Morrison, R. D. and Scott, A. (2003). Maximising the value of a wealth of information. In: L. Lorenzen, D. J. Bradshaw, C. Aldrich, J. J. Eksteen, E. Thom and M. Wright, Proceedings of the XXII International Mineral Processing Congress. International Mineral Processing Congress 2003, Cape Town, South Africa, (1473-1483). 29 September - 3 October, 2003.
|
13 |
|
|
|
|
Holtham, P. (2008). Measurement and reconciliation of the coal production chain. In R. D. Morrison (Ed.), An introduction to metal balancing and reconciliation (pp. 517-568) Indooroopilly, Australia: Julius Kruttschnitt Mineral Research Centre.
|
75 |
|
|
|
|
Chandramohan, R. and Powell, M. S. (2005). Measurement of particle interaction properties for incorporation in the discrete element method simulation. In: Tim Napier-Munn, Minerals Engineering; JKMRC International Student Conference. JKMRC International Student Conference, Brisbane, Australia, (1142-1151). 6-7 September 2004.
|
32 |
|
9
|
Cited 9 times in Scopus9
|
|
Ng, M. and Holtham, P. N. (2001). Measuring the resistivity of titanium minerals in a corona field. In: , Proceedings of the International Heavy Minerals Conference - Advances in Mineral Beneficiation. Interantional Heavy Minerals Conference, Fremantle, (75-80). 18-19 June 2001.
|
60 |
|
0
|
|
|
Xu, D., Liu, L. X., Addai-Mensah, J. and Robinson, D. J. (2012). Mechanical strength of nickel laterite pellets and their stability under soaking and leaching conditions. In: , Chemeca 2012 : quality of life through chemical engineering. Australasian Chemical Engineering Conference (CHEMECA 2012), Wellington, New Zealand, (). 23-26 September 2012.
|
40 |
|
|
|
|
He, Yaqun, Zhao, Yuemin, Duan, Chenling, Zuo, Weiran and Zhang, Wenjun (2007). Mechanism of active pulsing air classification and its application to waste PCBs disposal. In: , Progress in Environmental Science and Technology, Vol I. 2007 International Symposium on Environmental Science and Technology, Beijing, China, (). 13-16 November, 2007.
|
19 |
|
|
|
|
He, Yaqun, Zuo, Weiran, Lao, Guohong, Duan, Chenlong and Wei, Hua (2008). Mechanism of the coal nature prediction system and its application in Fengfeng coalfield of China. In: , Proceedings of the 24th Annual International Pittsburgh Coal Conference 2007. 24th Annual International Pittsburgh Coal Conference 2007, Johannesburg, South Africa, (). 11-14 September 2007.
|
15 |
|
|
|
|
Peng, Yongjun and Bradshaw, Dee (2012) Mechanisms for the improved flotation of ultrafine pentlandite and its separation from lizardite in saline water. Minerals Engineering, 36-38 : 284-290.
|
9 |
|
0
|
0
|
|
Peng, Yongjun and Bradshaw, Dee J. (2011). Mechanisms for the improved flotation of ultrfine pentlandite and its separation from serpentine in saline water. In: Flotation '11, Cape Town, South Africa, (1-11). 14-17 November 2011.
|
21 |
|
|
|
|
Mahadi, Masara Idahamisa and Palaniandy, Samayamutthirian (2010) Mechanochemical effect of dolomitic talc during fine grinding process in mortar grinder. International Journal of Mineral Processing, 94 3-4: 172-179.
|
25 |
|
2
|
Cited 2 times in Scopus2
|
|
Palaniandy, Samayamutthirian and Azizli, Khairun Azizi Mohd (2009) Mechanochemical effect of talc during fine grinding process in a jet mill. International Journal of Mineral Processing, 92 1-2: 22-33.
|
56 |
|
|
Cited 12 times in Scopus12
|
|
Zaman, Siti Aishah Kamarul, Palaniandy, Samayamutthirian and Hussain, Zuhailawati (2010) Mechanochemical synthesis of nanostructured SiO2-SiC composite through high energy milling. Journal of Alloys And Compounds, 502 1: 250-256.
|
19 |
|
4
|
Cited 3 times in Scopus3
|
|
Palaniandy, Samayamutthirian, Azizli, Khairun Azizi Mohd, Hussin, Hashim and Hashim, Syed Fuad Saiyid (2008) Mechanochemistry of silica on jet mill. Journal of Materials Processing Technology, 205 1-3: 119-127.
|
24 |
|
6
|
Cited 8 times in Scopus8
|
|
Jankovic, A. (2001) Media stress intensity analysis for vertical stirred mills. Minerals Engineering, 14 10: 1177-1186.
|
55 |
|
9
|
|
|
Cavanough, G. L., Holtham, P.N. and Powell, T. M. (2008). Medium density measurement without the need for gamma ray source. In: Mathewson, D., Proceedings of the 12th Australian Coal Preparation Conference - Cleaning Coal to Secure Our Future. 12th Australian Coal Preparation Conference, Darling Harbour, Sydney, NSW, (80-88). 19-23 October, 2008.
|
39 |
|
|
|
|
Morrison, R. D., Gu, Y. and McCallum, W. (2002). Metal balancing from concentrator to multiple sources. In: , Value Tracking Symposium. Value Tracking Symposium, Brisbane, Australia, (141-147). 7-8 October 2002.
|
67 |
|
|
|
|
Morrison, R. D. and Dunglison, M. E. (2006). Metallurgical accounting, control and simulation. In Tim Napier-Munn (Ed.), Wills' Mineral Processing Technology 7th ed. (pp. 39-89) Oxford, UK: Butterworth-Heinemann.
|
67 |
|
|
|
|
Jansen, W. M., Morrison, R. D. and Dunn, R. (2007). Metallurgical accounting in the Northparkes Concentrator: A case study. In: , Ninth Mill Operators' Conference 2007. Ninth Mill Operators' Conference 2007, Fremantle, WA, Australia, (157-168). 19-21 March, 2007.
|
175 |
|
0
|
|
|
Richardson, M. and Morrison, R. D. (2003). Metallurgical balances and efficiency. In Maurice C. Fuerstenau and Kenneth N. Han (Ed.), Principles of Mineral Processing (pp. 363-389) Littleton, Colorado, USA: SME.
|
47 |
|
|
|
|
Holuszko, M., Wightman, Elaine M. and Manlapig, Emmanuel (2010). Methods for improving the flotation recovery of the coarse fraction of a nickel ore. In: , XXV International Mineral Processing Congress - IMPC 2010 'Smarter processing for the future. International Mineral Processing Congress 2010, Brisbane, Qld, Australia, (1971-1979). 6-10 September, 2010.
|
63 |
8 |
|
|
|
McFarlane, A., Bremmell, K. and Addai-Mensah, J. (2005). Microstructure, rheology and dewatering behaviour of smectite dispersions during orthokinetic flocculation. In: Tim Napier-Munn JKMRC International Student Conference 2004, Brisbane, Australia, (1173-1182). September 2004.
|
38 |
|
13
|
Cited 15 times in Scopus15
|
|
Chen, Z. Q., Kawasuso, A., Xu,Y., Naramoto, H., Yuan, X. L., Sekiguchi, T., Suzuki, R. and Ohdaira, T. (2005) Microvoid formation in hydrogen-implanted ZnO probed by a slow positron beam. Physical Review B, 71 11: 115213-115220.
|
43 |
|
42
|
Cited 40 times in Scopus40
|
|
Robinson, J., Kingman, S., Snape, C. E., Antonio, C., Pereira, I., Page, P. W. and Thomas, D. J. (2010). Microwave treatment of oil contaminated drill cuttings - Toward a commercial scale system. In: , Proceedings of the SPE International Conference on Health, Safety and Environment in Oil and Gas Exploration and Production. SPE International Conference on Health, Safety and Environment in Oil and Gas Exploration and Production, Rio de Janeiro, Brazil, (). 12-14 April 2010.
|
32 |
|
|
|
|
van der Westhuizen, A. P .P and Powell, M. S. (2006). Milling curves as a tool for characterising SAG mill performance. In: Mular and et al, Proceedings of the International Conference on Autogenous and semi-Autogenous Grinding Technology. International autogenous and semiautogenous grinding technology, Vancouver Canada, (217-132). 24-27 September, 2006.
|
78 |
|
|
|
|
Wang, Eric, Shi, Feng N. and Manlapig, Emmanuel (2012) Mineral liberation by high voltage pulses and conventional comminution with same specific energy levels. Minerals Engineering, 27-28 : 28-36.
|
54 |
|
4
|
Cited 6 times in Scopus6
|
|
Becker, M., Harris, P. J., Wiese, J.G. and Bradshaw, D. (2009) Mineralogical characterisation of naturally floatable gangue in Merensky Reef ore flotation.. International Journal of Mineral Processing, 93 3-4: 246-255.
|
30 |
|
5
|
Cited 5 times in Scopus5
|
|
Parbhakar, Anita, Edraki, Mansour, Bradshaw, Dee and Walters, Stephen (2009). Mineralogical characterisation techniques for predicting acid rock drainage. In: Jacques Wiertz and Chris Moran, enviromine2009: Proceedings of the First International Seminar on Environmental Issues in the Mining Industry. Enviromine 2009: First International Seminar on Environmental Issues in the Mining Industry, Santiago, Chile, (). 30 September-2 October 2009.
|
67 |
|
|
|
|
Ziemski, Marcin and Tuckwell, Kevin D. (2005). Minerals industry and universities work together in Australia. In: Jerzy Moscinski and Marcin Maciazek, Proceedings of the International Conference on Engineering Education ICEE'2005. International Conference on Engineering Education: Global Education Interlink, Gliwice, Poland, (265-269). 25-30 July 2005.
|
38 |
|
|
|
|
Adel, G., Smith, B., Kojovic, T., Thornton, D. M. and Richardson, M. (2005). Mine to mill optimization of aggregate production. In: , SME Annual meeting. SME Annual Meeting, Salt Lake City, Utah USA, (1-7). 28 February - 2 March, 2005.
|
61 |
|
|
|
|
Weerasekara, N. S., Powell, M. S., Cole, S. and Favier, J. (2010). Modeling breakage environment in tumbling mills using DEM and analyzing the outputs. In: Antonio Munjiza, Discrete Element Methods - Simulation and discontinua: Theory and applications. DEM5: The Fifth International Conference on Discrete Element Methods, University of London, (477-483). 25-26 August, 2010.
|
41 |
2 |
|
|
|
Herbst, J., Potapov, A., Hambidge, G. and Rademan, J. (2008). Modeling of diamond liberation and damage for Debswana kimberlitic ores. In: B. A. Wills, Minerals Engineering. Discrete Element Methods (DEM) ’07, Selected papers from Discrete Element Methods (DEM) ’07. Discrete Element Methods (DEM) 07, Brisbane, Australia, (766-769). 27-29 August 2007.
|
45 |
|
0
|
0
|
|
Majumder, A. K., Lyman, G. J., Brennan, M. and Holtham, P. N. (2006) Modeling of Flowing Film Concentrators - Part 1. Water Split Behaviour. International Journal of Mineral Processing, 80 1: 71-77.
|
105 |
|
4
|
Cited 6 times in Scopus6
|
|
Hancock, William, Weatherley, Dion and Chitombo, Gideon (2012). Modeling the Gravity Flow of rock using the Discrete Element Method. In: , MassMIN 2012 Conference Proceedings. MassMin 2012: 6th International Conference and Exhibition on Mass Mining, Sudbury, Ontario, Canada, (). 10-14 June 2012.
|
21 |
2 |
|
|
|
Franzidis, J., Manlapig, E. and Morrison, R. D. (1999). Modelling and control of flotation circuits. In: , Mineral Processing and Hydrometallurgy Plant Design. Mineral Processing and Hydrometallurgy Plant Design, Perth, WA, (203-215). 2-3 November 1999.
|
32 |
|
|
|
|
Foggiatto, Bianca, Delboni, H. and Souza, E. W. V. (2008). Modelling and simulating the Carajas grinding circuit. In: Third International Meeting on Ironmaking and Second International Symposium on Iron ore, Sao Luis City, Brazil, (90-103). 22-26 September 2008.
|
12 |
|
|
|
|
Reyes-Bahena, Juan L. (2001). Modelling and Simulation of the Grinding Circuit at 'El Pilon' Mine.
|
1423 |
2397 |
|
|
|
Valery, W., Morrell, S., Kojovic, T., Kanchibotla, S. S. and Thornton, D. M. (2001). Modelling and simulation techniques applied for optimisation of mine to mill operations and case studies. In: A. da Luz and P. Soares et al, VI Southern Hemisphere Meeting on Mineral Technology. VI Southern Hemisphere Meeting on Mineral Technology, Rio de Janeiro, (107-116). 27 May - 1 June 2001.
|
95 |
|
|
|
|
Benzer, H., Ergun, L., Lynch, A. J., Oner, M., Gunlu, A., Celik, I. B. and Aydogan, N. (2001) Modelling cement grinding circuits. Minerals Engineering, 14 11: 1469-1482.
|
159 |
|
13
|
|
|
Tucker, M., Kanchibotla, S. and Ruest, M. (2006). Modelling coal loss in open-pit blasting using PFC2D. In: , Fragblast-8: 8th International Symposia on Rock Fragmentation by Blasting. 8th International Symposia on Rock Fragmentation by Blasting (Fragblast-8), Santiago, Chile, (109-113). 7-11 May 2006.
|
18 |
|
|
|
|
Djordjevic, N, Morrison, R, Loveday, B and Cleary, P (2006) Modelling comminution patterns within a pilot scale AG/SAG mill. Minerals Engineering, 19 15: 1505-1516.
|
110 |
|
6
|
Cited 7 times in Scopus7
|
|
Kanchibotla, S. S., Valery, W. and Morrell, S. (1999). Modelling fines in blast fragmentation and its impact on crushing and grinding. In: , Australasian Institute of Mining and Metallurgy Publication Series: Explo'99: A Conference on rock Breaking. Explo'99: A Conference on Rock Breaking, Kalgoorlie, WA, (137-144). 7-11 November 1999.
|
120 |
|
2
|
|
